Jump to content
SAU Community

Recommended Posts

???? Never touched an engine ??? Any tuner worth there salt will be able to tune , it's a base set or rules ! Or are our vq's that temperamental? It's not like having an 800+rwkw car with a stand alone ecu that you would want tuned by a specialist ie.. Like a vl and breschani. It's a piggy back comp and a tune,

I'm just surprised that's all not waning to put any ones nose out of joint

???? Never touched an engine ??? Any tuner worth there salt will be able to tune , it's a base set or rules ! Or are our vq's that temperamental? It's not like having an 800+rwkw car with a stand alone ecu that you would want tuned by a specialist ie.. Like a vl and breschani. It's a piggy back comp and a tune,

I'm just surprised that's all not waning to put any ones nose out of joint

It has taken Cihan 40 or 50 tunes to work out how to setup the EMU properly. This isn't a Nistuned RB we are talking about. There have only been 10 or 12 VQ25det's tuned in Aus so far.

???? Never touched an engine ??? Any tuner worth there salt will be able to tune , it's a base set or rules ! Or are our vq's that temperamental? It's not like having an 800+rwkw car with a stand alone ecu that you would want tuned by a specialist ie.. Like a vl and breschani. It's a piggy back comp and a tune,

I'm just surprised that's all not waning to put any ones nose out of joint

See your own Sig. :P

yeah, its a bit tricky to get a Ecu that adjusts so many parameters to work efficiently with such a shitty tuning tool that is EManage.

On Friday I borrowed a mates patrol (which is so much fun to drive), collected a car trailer and towed my S1 up to the Transmission shop. 45 minutes after leaving he called me to tell me that there was bits of clutch and metal in the sump and would be taking the gearbox out today for inspection and stripping it down..

at 2pm I get a phone call saying that IIRC the 3rd and 4th clutch packs have blown, snapped band, worn solenoid and wobbly bearings.

seems when I bought the car it all felt lovely and nice but I now suspect that the fresh fluid in the gearbox was a quick fix to keep it running and able to sell it..

but never mind, the car should be back before the weekend and will have all new clutches, bands, a shift kit and recon'd torque converter :)

stagea_zpscfcd356d.jpg

Sorting threw the " will haves " "mine will do's "

"im gonna make 6000hp's" not to forget the "were happy to try tune your setup to host xyz mods" cowboy tuners/mechanics. Could require much

MOre than time to waist not to mention throw away $$$...

So it seemed simple clear and logical to me.

Scott from day 1 has had outstanding customer service a real encyclopaedia of knowledge based on nm35 vq25det alone.

Help , information costs money 9 x out of 10 scotts certainly spoken fact from fiction every time even when ones ideas float all over the place.

Conclusion...

Drive to vic & back easy

some folk cruise that distance over a weekend with there hand grenade half assed tuned pride and joy

Ill support the bloke that will enjoy getting the best out of someone elses ride.

Cheers bloke

..

Yeah I totally agree there are a lot of cowboys and shit tuners, out there, there are also are some guys who give a shit still, and there are a lot of ppl who do the "mine will make and mine will do this". That's why I only post up figs that have achieved, and realistic ones not ones that are made then engine goes bang, but ones that are driven on all the time, ... No grenade tunes here.

Also I understand the limited capabilities of the emanage ultimate I ran and played around tuning one on my c34 definitely not the best thing I've used hence whilst in in the shed as a paper weight.

Also leaves a dilemma for me as if I deem the m35 worth while of power modification I would be taking a different root than normal requiring a good tuneable Ecu ,and a fair bit of custom work but hey that's what I love doing .

up nice and early today and up to knox automatics to collect my stagea, full gearbox rebuild including torque converter and stage 2 shift kit.. WOW is all I can say :)

Picked up a dolphin carbon fiber/fiberglass vented bonnet. It gets sprayed factory black to match the car tomorrow!! Also picked up some D1 Sanko bonnet pins which are getting installed as well :) very excited to see how it looks!!!

1) Purchased a set of factory hids and installed them with 8000k bulbs which are too dim for me so I purchased another set of 4300k and will install them once they arrive.

2) Replaced the driverside headlight tilt motor. Just have to fine tune it tonight when its a bit darker.

3) Installed the aftermarket afm I bought from scotty to trial (oem still good)

4) Replaced the coilpack tube that was found to have a hole in it.

Took car for a test drive with new afm and she dont like it. On full boost there is a rev cut/dip with it unlike the oem one. I will put the oem one back in tomorrow and see if it goes away.

Took car for a test drive with new afm and she dont like it. On full boost there is a rev cut/dip with it unlike the oem one. I will put the oem one back in tomorrow and see if it goes away.

They do seem to run a little richer on boost than OEM, I suspect they have a slightly different airflow/Voltage curve. Only the modified cars seem to display the rich running, at least it's better than lean mixtures I guess. Did you reset the ecu before fitting it Josh?

The problem is the 'replacement' Nissan AFM's run much the same as these, and only last a short time in comparison, (something gets damaged inside at full noise for some reason.) I have yet to hear of a failure from these aftermarket afm's, and the price is much more reasonable.

Gives you a good reason to tune the car Josh. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...