Jump to content
SAU Community

Recommended Posts

309kw @ 19psi dropping to 17 (i think :P)for my 2nd run in tune on the heartbreaker dyno. Running it rich until full boost tune at 3000kms... 800 to go :D Full boost will hopefully be around 25psi with the 3076r and Tomei built motor, I guess we'll see where she starts to choke.

Redline is now 8000rpm with the new harmonic balancer, which is entertaining lol. The Old Girl actually feels quick, now to get her fast...

E85 then

That is exactly the same as mine 19 dropping to 17psi made 338 on morpower dyno so if you took off the drop for the heartbrake dyno would be about the same ! Well done what rear did you end up running same as mine ?? Got a dyno sheet wold love to over lay it be interesting , yet again well done:)

Was going to keep playing with stag but the new drag car is taken over.

Ill just retune more boost 21-22psi and turn the water on should do for now .

So coming out on the cruise soon

Cheers jase

Heh, I don't have access to the dyno sheet at the moment, I'm away on work. I have this crappy screen capture from a video of the run taken on my phone.

I'd love to post the video but it'd be way large, suggestions on how to post it may help me though, I have become less computer literate as time goes on.

Still running auto rear, I have been babying it on launches until a couple of further upgrades are made, just bought an apartment so spending on the stag is halting for a few months until I get money back in the bank :)

It will be interesting to see how ours compare on higher boost, I am really looking forward to turning the wick up and putting all that Japanese forged to the test :D

Yeah you got a fair few $$$ worth of name brand parts in that engine :) should be able to handle a gut load of boost but I reckon your turbs as mine will will nose over soon after 22ish! Launches will be fine just not on preped track ,have you got an lsd in? What clutch you end up running,

Any way crappy pic and excuse filthy car but fitted my s1 miester R full carbon bonnett yesterday (über rare) very happy :)post-76904-0-59454000-1392384663_thumb.jpg

Bonnet looks great!

Yeah, will just have to wait and see where the turbo finishes up, but I built the engine with the future in mind, so I can upgrade the turbo if I ever want more power. At this stage I'd be pretty happy with 330wkw on the heartbreaker tbh. Anthony @ Jaustech seems to think that its easily acheivable, he said the engine has so much left in it, which is reassuring :).

No LSD, I'll get a manual rear cradle in time, as finances allow. The next upgrade will be DBA4000 33 GTR front discs and matching 33 GTS-T rear discs and ProjectMu Club Racers Pads. I only have a few thousands kms left on my current brakes, so it will be a necessity more than a want.

I have a near new 2nd hand twin plate Nismo GMAX II (that I will sell one day when I get around to it lol) but i decided i wanted a new coppermix instead, so in the meantime I am running an extreme single plate something or rather... heavy as f**k, but holds the power :)

post-36265-0-83021400-1392413893_thumb.png

Edited by stageaharts

you two have insane stags!

i installed my cusco coilovers and adjustable arms in the front

IMAG0186_zpsfa193442.jpg

sitting pretty now, might roll the backs and drop it a tad more, but dont want to go stupid low.

IMAG0191_zps8a67c65e.jpg

Nice one harts :)

Engine build specs?

Damn I'd love to go nistune board 6 and bigger injectors :(

After tune I'm putting it up on gumtree for sale I think.... All in my head, but if I got defected I'm rooted & would have to part it out. Never had an issue, moreso 'whatif' factor.

Will post back after tune with the result. I'd be happy with any result higher than previous tune pre engine rebuild (was 255rwkw at 1bar).

4b, looks awesome mate !!

Thanks tangles, as far as the engine stuff is concerned it's a bit of a list so forgive me:

Stagea Rb25det overbore to 2664cc, 8000rpm redline, running on e85.

Garret 3076r

Tial 44mm external wastegate

AM Performance low mount exhaust manifold

Tomei forged Pistons

Tomei forged Rods

Tomei Oil Pump

Tomei Sump Baffle

Jun Crank Collar

N1 Water Pump

ACL Race series bearings

ARP Main and Head studs

Ross Harmonic Balancer

Tomei 256 Poncams

Supertech valve springs with titanium retainers

Full head recondition with mild porting and oil control mods

Shaved Deck

Splitfire coilpacks

Injector Dynamics ID1000cc injectors

Low profile fuel rail with external Turbosmart adjustable fuel regulator

Walbro e85 fuel pump

Apexi pod filter

AM Performance intake and intercooler pipes

Cooling Pro return flow intercooler

R34 GTT Nistuned ecu

Z32 Airflow meter

Blitz dual solenoid SBC iD III boost controller

AM Performance split dump pipe

Venom 5" high flow metal cat

Blitz Nur Spec cat back exhaust

R32 GTR pull type manual gearbox

Extreme ceramic cushion button clutch

Setrab 19 row oil cooler

GReddy catch can

Speedflow fittings and braided hoses

There might be more, but I forget on purpose to ease the financial pain :P

Painted black for the sake of stealth :)

post-36265-0-60544200-1392439759_thumb.jpg

Bloody hell stagharts that thing is gold dipped ;) you could have bought two units:) should last for a 100 years ! Mines lasted a year of fun with full stock internals making what I do . You should chuck a bigger turbo on it and while your at it build a gearbox and push the mofo.....!

The box seems to be the next weakest link in my set up just waiting for it !!!

You have full tune done for the drags in end of march? Should run it :)

Haha, I have learnt that nothing is bulletproof in the world of modifying :P But yes, I built it with the future in mind. In the longterm I'm sure I will put a bigger turbo on, bit I'm in no rush :)

I know what you mean about the box, mine seems to handle it fine at the moment, but I know that 300+ wkw is right on the edge of its working range.

I think that the tune should be done in March, bit the limiting factor will be whether or not I am in the state at the time.

Your car looks very similar to mine now BTW, black/carbon bonnet and black/carbon ganadors :) lucky I have black wheels hehe

Mine isn't, just professionally painted satin black (2008, didn't even know about wrap back then)... was worried about the chances of getting pulled over being increased if it was carbon... but I do love the final motion carbon bonnet for the s1 :)

post-36265-0-61438900-1392532079_thumb.png

Edited by stageaharts

went through a bretho last night, gave me a chuckle.

large rbt setup:

blew into the box

0.0

car infront took ages and the cop started putting his hands under the gurards and coudlnt fit

"mate i think this is too low, have you changed the suspension?"

"yes"

"hmmm, " calls another cop over "hey do you think this is too low?"

cop2- "yeah probably" walks off

"hmmm sarge will know....hey sarege, is this too low?"

Sarge "For f**k sake mate were busy, seriously!"

"ok mate off you go"

lol

  • Like 2

oh, so lucky!!! Thats what stresses me out

0.o

Being f/time student with no cash, I couldnt afford to do Regency if ever defected.

Pretty certain Im going to advertise properly - Gumtree - once dynotune done next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...