Jump to content
SAU Community

Recommended Posts

I still have a set on my C34.

attachicon.gifImageUploadedBySAU Community1410856825.591320.jpg

(Now with added rear spoiler)

Yep I think they are quite good looking wheels. I put a spoiler on my car too - the only bit of expenditure that doesn't make the car go faster - because I think it improves the look a lot. I would like to lose the roof rails but can't justify the cost atm.

  • Like 1

Not done much to mine recently. But have just acquired a 12" long crack in the windscreen on the lower passenger side.. Then today taking my little boy swimming I parked on a hill (rear down to the left) with not much fuel, car started fine, reversed went up said hill out of the swim center and car cut out, with lack of fuel. Light didnt even flicker on the way up there, but was on nice and bright when I returned.. All the fuel must have moved away from the fuel pump and got me stranded on a hill.

Thinking my coils are on theyre way out also, cars just clocked 170,000km and getting some crazy hesitation under boost around the 3,500 rpm mark.. Going to pop the coils out tomorrow for a closer inspection..

One day I will get around to ordering some coilovers, bigger brakes and some tasty wheels, but for now itll be general maintenance and unwanted repairs :(

Not done much to mine recently. But have just acquired a 12" long crack in the windscreen on the lower passenger side.. Then today taking my little boy swimming I parked on a hill (rear down to the left) with not much fuel, car started fine, reversed went up said hill out of the swim center and car cut out, with lack of fuel. Light didnt even flicker on the way up there, but was on nice and bright when I returned.. All the fuel must have moved away from the fuel pump and got me stranded on a hill.

Thinking my coils are on theyre way out also, cars just clocked 170,000km and getting some crazy hesitation under boost around the 3,500 rpm mark.. Going to pop the coils out tomorrow for a closer inspection..

One day I will get around to ordering some coilovers, bigger brakes and some tasty wheels, but for now itll be general maintenance and unwanted repairs :(

Won't do any harm to give the coils a good clean and maybe insulate them but have you had a new set of plugs lately? And gap them down to 0.8mm

  • Like 2

Today I DROVE the Dayz. I am a happy man. Only took ten months!

Also found out that when you turn on the immobilizer, if the windows are down, they come up Another plus.

Did a couple of things over the weekend.

Got the tailgate and cargo floor struts re-gassed, $90 for all 4.

Always seemed to be the wife who would get whacked in the head by the tailgate!

Also did the brake cut mod, used a nice subtle missile switch.

post-135423-0-14220100-1411294430_thumb.jpg

  • Like 2

what have I don't lately?? Well... had a little leaking issue in number 6. went to change plugs. 6 was seized, snapped the plug below the nut. FML . had pro threads come out who smashed the ceramic and blew it all out then heli coiled it. BUT he managed to get the ceramic from the plug into the exhaust. so when I started it blew through snapping 3 fins off my newly high flowed turbo. the little tail end of the spark plug hung around in the cylinder doing a little dance in on the piston and tickling the head! So now I have a gt3582 going on. the head is at the mech being cleaned up but when they where dismantling the head they cam across the intake cam`s snapped locator pin. so now I'm on the hunt for a standard RB25 neo intake cam! have you got one? na or turbo both the same!

these are from Z33. i've bought complete kit - fronts, rear, center console as it is on pics

here is rear one:

3789aacs-960.jpg

also fitted 19" CE28N with custom paint 9.5+22 fronts with 245-40, rears 10.5+22 with 275-35. Rolled rear guards a bit)

a5e8c0cs-960.jpg

love this rims a lot. finish is custom, bought them in bronze, got mirror polished, then painted centers with acrylic matte.

2ea3bf4s-960.jpg

578dbf4s-960.jpg

wondered if there is no button to "cut" post, showing pics only on demand

  • Like 4

Looks awesome mate one up on me hoe do you find the hight of the seats? Wouldn't have thought the rears would fit but goid to know. Do they fold down like stock seats all the way?

Very impressive. I hope to replace my factory seats one day but wanted to keep a more luxury appeal.

.... and those wheels :wub:

Edited by Beregron

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...