Jump to content
SAU Community

Recommended Posts

post-94823-0-15349500-1411972212_thumb.jpgpost-94823-0-82692300-1411972279_thumb.jpgpost-94823-0-82924700-1411972300_thumb.jpgpost-94823-0-71147300-1411972322_thumb.jpgJust in the middle of installing my paddle shifter from a 350gt-8. I was not game enough to remove the steering wheel off/airbag, so I cut the paddles into halves to be able to fit the paddles around the steering wheel.

  • Like 1

attachicon.gif20140613_225446.jpgattachicon.gifWP_000400.jpgattachicon.gifWP_000402.jpgattachicon.gifWP_000403.jpgJust in the middle of installing my paddle shifter from a 350gt-8. I was not game enough to remove the steering wheel off/airbag, so I cut the paddles into halves to be able to fit the paddles around the steering wheel.

How do you plan on attaching it? aren't the screw positions still behind the steering wheel?

Gave a bit of love to the old girl today.

Changed the clock spring to hopefully fix the airbag fault I've been getting, as in the thread I posted.

Secondly, got four new tyres on her. Same tyres I ordered from tyre rack last time- continental extreme contact DW. Can't fault them. Only a bad alignment prematurely killed a pair of them, so hopefully they'll be good for a good while to come. Got the two 1/2 decent ones as backups incase something goes bad.

How do you get them to work? Is there already a plug on the loom somewhere for it or do you have to run wires yourself?

I have to run wires to the centre console and splice into the transmission wiring by the lever. Use 2 relays to activate up or down. I write up a how to install paddle shifter from a 350gt-8 when Im done. A guy from Nz north island has done the same thing on his v35 and its working perfectly.

post-94823-0-96033600-1412061975_thumb.jpgpost-94823-0-83211400-1412061993_thumb.jpgpost-94823-0-51125700-1412062011_thumb.jpg

How do you plan on attaching it? aren't the screw positions still behind the steering wheel?

I had to remove the top and bottom shroud for the steering column, once the clock spring is exposed, there are 2 holes above already there for it. So I just turn the steering wheel until I clear the holes and then just use a short tapping screws to attached it. Then I made up a bracket for the bottom piece to add rigidity for the paddles(not necessary as the top screws makes it all secure). Then I had to use the v35 top/bottom shrouds(with a bit of modification) to cover it all. Can use the M35

shrouds but its alot of cutting/messing around.

  • Like 4

attachicon.gifWP_000422.jpgattachicon.gifWP_000423.jpgattachicon.gifWP_000424.jpg

I had to remove the top and bottom shroud for the steering column, once the clock spring is exposed, there are 2 holes above already there for it. So I just turn the steering wheel until I clear the holes and then just use a short tapping screws to attached it. Then I made up a bracket for the bottom piece to add rigidity for the paddles(not necessary as the top screws makes it all secure). Then I had to use the v35 top/bottom shrouds(with a bit of modification) to cover it all. Can use the M35

shrouds but its alot of cutting/messing around.

jo how much did the paddles set you back mate?
  • Like 1

Managed to find the time yesterday to get the plugs and coils out. Covered coils in silecone. Replaced plugs made sure they were tapped to 0.8.

Degreased the engine and replaced the rocker breather hose. Started up and wad missfiring hard.

Checked this morning and coil plug slightly off.

No more hesitation at 3k and running like a dream :)

Busy weekend. New battery, biggest I could fit, 260Lx170Wx200H, 680CCA, bit of aluminium for the strap, earth lead pointing backwards to clear the fuse box.

Nice new clean pollen filter in the background sucking fresh air from the battery compartment!?

post-135423-0-87683100-1412159372_thumb.jpgpost-135423-0-14645200-1412159430_thumb.jpg

Finally got rid of the stuffed Bose stereo (someone needs a slap for designing that circuit board with the integrated AC controls)

Alpine CDE-154EBT, custom colour display to match the interior lights. Got my roof mount DVD playing through the front screen.

My car also came from Japan with an "R-spec, NTV-165, Multi-vision Controller" which allows PASSENGERS to watch movies while driving (Mr police officer).

Found a glovebox light while putting in the stereo which I could not get to work, globe was good, all fuses good, found something online about it coming on with parkers but still no good so I decided to wire it up to constant power and a switch so it comes on when you open the glovebox (perfect spot for a switch if you take out the right hand side rubber bump stop). Modified the holder to take a bigger bulb and opened it up where it clips in to let more light through. (Too much work for a glovebox light!?)

post-135423-0-56122700-1412160649_thumb.jpgpost-135423-0-26779600-1412160686_thumb.jpg

post-135423-0-79278900-1412160727_thumb.jpgpost-135423-0-38375000-1412160753_thumb.jpg

  • Like 1

Ordered the last 2 bits i think i need for the next stage on my M35 (apologies to Scotty for taking up more of his spare time ;) )

3rd week in November has been pencilled in for tuning :woot:

  • Like 2

yeah mate Emanage.

I've thought about it a lot and for a car that's only really driven on the weekend (besides getting me to and from the train station of a weekday) there is a limit to what i want to spend.

Looking forward to the results.

Fixed oil leak in both cam covers. Drilled out 2 broken bolts and re threaded. Now to burn off excess degreaser and back to normal. Reinstalled dales front underbody brace from underneath supports to above. Fits in there nicely. No occasional underbody bumps now. Flush!!

  • Like 3

In the end no mate.

I'm going to make the slightly painful drive up north to Cavan and see Shaun at Boostworx.

Hopefully all goes more or less smooth.

Interesting. Let us know how you get on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...