Jump to content
SAU Community

Recommended Posts

Fueled up after a full tank of my normal driving with putting the foot down a couple of times to ahem... Blow the cobwebs out. 50/50 open road and city driving.

350RX 616.5km 67.3L which by my maths is 9.16km/L and pretty much about same as what I was getting from the 250RS. :)

Replaced all the door speakers - I thought they were original factories all round but no, only in the front. The rears had an amazing $11 pair that took the quality of the sound right out of the 50's and into 1960's spec! :P

6.5 inch all round, used the original plastic mounts, cutters and a power drill to get the fronts sitting nicely :D

Today I have made a double din surround facia for my sony dvd player. I made it from balsa wood and will be fibreglassing it tomorrow then painting it black to tie in with my unit.

I have also installed a cigerette socket into the rear wall compartment for when I travel with my engal fridge. post-77821-0-23273700-1419751418_thumb.jpg

In the last few weeks my Stagea has been detailed within an inch of it's life by a good mate, and as is the fashion in recent times killed a rear wheel bearing an destroyed the stub axle.

Managed to accumulate all the necessary parts juuuust in time to get it all together for the Christmas break.

Other than that, she's just been belting along happily about the place filled with kids, bikes, presents, drunk mates, and my bloody mother...

  • Like 1

In the last few weeks my Stagea has been detailed within an inch of it's life by a good mate, and as is the fashion in recent times killed a rear wheel bearing an destroyed the stub axle.

Managed to accumulate all the necessary parts juuuust in time to get it all together for the Christmas break.

Other than that, she's just been belting along happily about the place filled with kids, bikes, presents, drunk mates, and my bloody mother...

Damn mothers ruining all the fun

  • Like 1

Swapped out my o2 sensor. After spending an hour attempting to mangle the old one out, I finally found the perfect socket designed for it. This + short extender + half inch rachet and half a second of effort to loosen it up to unscrew out.

12 bucks too, thanks Beeps Auto Parts!

Now to see if the new one makes a difference..

  • Like 1

Finished installing cruise control kit from Commsman, all good! Used an Axxess SWC interface with the factory switches and my Alpine head unit, works perfectly.

Put on my brand new, second hand front quarter panel to fix my roo damage. Love Yahoo Japan, $21 with indicator! (plus freight of course). Just had to swap the grey trim piece. No $550 excess, claim against my name, car gone for a week or newly painted panel next to 10 year old paint.

Found this rubber drain under the battery compartment when I removed the quarter which was clogged with dirt and leaves and bugs and ewoks, remember reading somewhere about this compartment filling up with water and corroded third fuse boxes. Might pay to clean out the other side as well.

post-135423-0-36941900-1420069284_thumb.jpgpost-135423-0-97599100-1420069306_thumb.jpg

Next project:

post-135423-0-80202700-1420069438_thumb.jpg

Going to take off the front bumper to see what size cooler I can fit (think I'll go for a PWR)

  • Like 2

Started changing the oil last night with the car on the ground, naturally I fumbled the sump plug and lost sight of it. Ragequit and went back to it this morning. Cue 10 minutes of fumbling round in the drain pan, first with a random piece of bark, then with my fingers, all to no avail. Eventually found it trapped in the top side of the undertray. Sigh.

It's still not really burning any oil though, I'm getting out almost as much as I'm putting in despite the enthusiastic driving it gets every now and then.

Drilled new holes to lift the number plate up a bit to cover the raised area on the bumper and then cut out the lower grill which was cracked and faded and replaced it with black mesh. It's only the stock bumper (and it needs a good cut and polish) but I think it looks a bit neater.

post-135423-0-03085500-1420945413_thumb.jpgpost-135423-0-98814400-1420945440_thumb.jpg

It's wet here also.

Not to the Stagea but from a Stagea.

Slipped a Neo into the R32. Cant wait for the grunt.

High mount and FFP etc.

Edited by 66yostagea
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...