Jump to content
SAU Community

Recommended Posts

Fueled up after a full tank of my normal driving with putting the foot down a couple of times to ahem... Blow the cobwebs out. 50/50 open road and city driving.

350RX 616.5km 67.3L which by my maths is 9.16km/L and pretty much about same as what I was getting from the 250RS. :)

Replaced all the door speakers - I thought they were original factories all round but no, only in the front. The rears had an amazing $11 pair that took the quality of the sound right out of the 50's and into 1960's spec! :P

6.5 inch all round, used the original plastic mounts, cutters and a power drill to get the fronts sitting nicely :D

Today I have made a double din surround facia for my sony dvd player. I made it from balsa wood and will be fibreglassing it tomorrow then painting it black to tie in with my unit.

I have also installed a cigerette socket into the rear wall compartment for when I travel with my engal fridge. post-77821-0-23273700-1419751418_thumb.jpg

In the last few weeks my Stagea has been detailed within an inch of it's life by a good mate, and as is the fashion in recent times killed a rear wheel bearing an destroyed the stub axle.

Managed to accumulate all the necessary parts juuuust in time to get it all together for the Christmas break.

Other than that, she's just been belting along happily about the place filled with kids, bikes, presents, drunk mates, and my bloody mother...

  • Like 1

In the last few weeks my Stagea has been detailed within an inch of it's life by a good mate, and as is the fashion in recent times killed a rear wheel bearing an destroyed the stub axle.

Managed to accumulate all the necessary parts juuuust in time to get it all together for the Christmas break.

Other than that, she's just been belting along happily about the place filled with kids, bikes, presents, drunk mates, and my bloody mother...

Damn mothers ruining all the fun

  • Like 1

Swapped out my o2 sensor. After spending an hour attempting to mangle the old one out, I finally found the perfect socket designed for it. This + short extender + half inch rachet and half a second of effort to loosen it up to unscrew out.

12 bucks too, thanks Beeps Auto Parts!

Now to see if the new one makes a difference..

  • Like 1

Finished installing cruise control kit from Commsman, all good! Used an Axxess SWC interface with the factory switches and my Alpine head unit, works perfectly.

Put on my brand new, second hand front quarter panel to fix my roo damage. Love Yahoo Japan, $21 with indicator! (plus freight of course). Just had to swap the grey trim piece. No $550 excess, claim against my name, car gone for a week or newly painted panel next to 10 year old paint.

Found this rubber drain under the battery compartment when I removed the quarter which was clogged with dirt and leaves and bugs and ewoks, remember reading somewhere about this compartment filling up with water and corroded third fuse boxes. Might pay to clean out the other side as well.

post-135423-0-36941900-1420069284_thumb.jpgpost-135423-0-97599100-1420069306_thumb.jpg

Next project:

post-135423-0-80202700-1420069438_thumb.jpg

Going to take off the front bumper to see what size cooler I can fit (think I'll go for a PWR)

  • Like 2

Started changing the oil last night with the car on the ground, naturally I fumbled the sump plug and lost sight of it. Ragequit and went back to it this morning. Cue 10 minutes of fumbling round in the drain pan, first with a random piece of bark, then with my fingers, all to no avail. Eventually found it trapped in the top side of the undertray. Sigh.

It's still not really burning any oil though, I'm getting out almost as much as I'm putting in despite the enthusiastic driving it gets every now and then.

Drilled new holes to lift the number plate up a bit to cover the raised area on the bumper and then cut out the lower grill which was cracked and faded and replaced it with black mesh. It's only the stock bumper (and it needs a good cut and polish) but I think it looks a bit neater.

post-135423-0-03085500-1420945413_thumb.jpgpost-135423-0-98814400-1420945440_thumb.jpg

It's wet here also.

Not to the Stagea but from a Stagea.

Slipped a Neo into the R32. Cant wait for the grunt.

High mount and FFP etc.

Edited by 66yostagea
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...