Jump to content
SAU Community

Recommended Posts

So I haven’t posted in a while here but I picked up a Takeros kit which needed a bit of work and paint and it’s slowly making its way to being done.

its had the fibreglassing work done thanks to one of the awesome dudes at my work, I just need to bog it from the front and sand everything down and prep for paint.

I will need to remove my tow bar which is a bummer but not the end of the world.

89A52608-097A-4B70-93F4-81FD1A3511BB.thumb.jpeg.444f4cda736c3eb45def992f8b0966fc.jpeg 

6EC7C5B3-3233-4E7D-845E-ADCF417EB0C8.thumb.jpeg.443f5178a0f80fcb8cbc7fa688b22c08.jpeg1F85272A-6902-40FC-BDED-865C0CA93C38.thumb.jpeg.5394924fdf418fc931922f904520368d.jpeg

  • Like 1

Hi all, haven't posted in awhile, wagon been good, have horn/clockspring issue to fix tho... just saying hi. See lot of Stageas around Hawkes Bay now....

 

was doing the long distance relationship thing for awhile so car had good workout over Taupo rd.... some night shots... Cheers

 

 

IMG_0063.JPG

IMG_0064.JPG

  • Like 2
  • 3 weeks later...

Finally got around to kind of fitting up my rear wheels for now (Garson Ryugi Deep Racing 18"x12.5" -22). Adjusted suspension height and damper and smashed guards out with a guard roller, phone books and a jack handle until I either order bolt-on flares or bite the bullet and begin a widebody...

IMG_6413.JPG

  • Like 2
  • 1 month later...

New wheels and tyres ?

BBS Lm replica 8,5x19 et45 and 25mm Bolt spacers

235/40R19

Weekend work. change rear upper control arm and next week wheel aligment then I can get better pictures

DSC_0084.JPG

Edited by TukeH
Tyre size forgotten
  • Like 1
  • 3 weeks later...

Just sold the black PNM35, so we're back to a one-Stagea, one-Leaf family. :( It drove better than the silver one (had no options so was lighter, had hard bushes, lowered, better brakes and may have been shift-kitted) but since it didn't have a towbar or centre-rear 3-point seatbelt it was voted off the Island.

It served me well though, I bought it because I was doing a 600km round trip every week for work last year, and the mileage allowance I was paid meant it was basically free, so anything I got when I sold it was a bonus. Now I just have to convince my wife we should use the proceed to fit new bushes, suspension, brakes and a shift kit to the silver car. :P 

  • Like 2
  • 3 weeks later...

Evo 8 seats finally in. Stripped almost every bolt getting the old rails off and had to drill 2 of them out and re-tap (shhh don't tell). 

Sits much lower than stock, and wouldn't recommend if you're a big person. They are quite snug on my ass. 

Now to figure out the seat airbag delete... 

20180821_101123_001.jpg

  • Like 4
On 8/21/2018 at 10:18 AM, NicPM35 said:

Evo 8 seats finally in. Stripped almost every bolt getting the old rails off and had to drill 2 of them out and re-tap (shhh don't tell). 

Sits much lower than stock, and wouldn't recommend if you're a big person. They are quite snug on my ass. 

Now to figure out the seat airbag delete... 

20180821_101123_001.jpg

You want to solder a 2.2 ohm resistor into the wiring behind the plug  on the harness; that's the value of a seat airbag.

Poking it into the ins of the plug won't work, needs to be soldered into the wiring.

Seats look great in there.

On 9/2/2018 at 11:41 AM, Daleo said:

You want to solder a 2.2 ohm resistor into the wiring behind the plug  on the harness; that's the value of a seat airbag.

Poking it into the ins of the plug won't work, needs to be soldered into the wiring.

Seats look great in there.

Cheers, I've figured that bit out.

Totally voiding any insurance that I'm paying for and my safety probably too, but hey they look good right?!

Installed roof racks and roof basket, 3" turbo back straight pipe to a single 3" blast pipe and took the nugget to Powercruise for the weekend. Scrubbed up alright...

IMG_6701.JPG

IMG_6689.jpg

  • Like 1
  • 3 weeks later...

Finaly had time to take dp Off. 

I have to make new flange because I bought

Wrong ☹️ 

Just 2hours to remove dp and make flange and I did not lower the trans

 Without the induction heater one bolt would not have left off

IMG-20180928-WA0007.jpeg

IMG-20180928-WA0005.jpeg

IMG-20180928-WA0009.jpeg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...