Jump to content
SAU Community

Recommended Posts

Ok, sorry I must be missing something here. What offset did he say these things were?+20 or +30?

I had a quick squiz on the net, and could only findthose wheels in a 20x8.5 114.3 in a +35 offest. With a 120 PDC they come in a +20 or +40. Not saying there aren't more options, but thats all i could quickly find.

So, with a 20x8.5 +35, you will have 11mm less on the inner, and extend 1mm further out. No need for rolling or anything if it clears on the inside.

I'm sorry if i'm barking up the wrong tree, its late, but I just don't want him to be thinking he's going to be rolling guards/shaving wheels...:thumbsup:

yes you are correct............ changing from a 8" +30 to a 8.5" +35 is 1mm out :)

they come in +20, +30, +35, +40, +45

so i could get a 9.5" in a +45 if i can tuck an extra 34mm ROFL

by the looks of it my battery is pretty much cactus but what i would like to know is cos ive pulled the battery out overnight to charge it do i need to do the ecu reset proceedure again???

i got an RDO today so im gonna go install the plenum spacer :D

Bastard.

I was thinking about the plenum spacer on the way in to work (Yep, I sit on the bus and think about cars.. what of it) and wish I could better explain just what a difference it makes; its actually frustrating how Im not able to articulate what a difference it makes! Its a pretty straight forward install, the guys have explained/documented it really clearly - looking forward to seeing your response once its in :thumbsup:

Theo, the spacer is not the wrong one.

It was cut from the same template as all the other spacers that have been installed.

As I said in my PM, it only goes on one way, so try flipping it over or switching ends.

Theo, the spacer is not the wrong one.

It was cut from the same template as all the other spacers that have been installed.

As I said in my PM, it only goes on one way, so try flipping it over or switching ends.

FARK!!!!! yeah my mistake....... thought i tryed it all 4 ways HAHA

looking forward to seeing your response once its in :thumbsup:

ok what i noticed when i put the exhaust on it got very peaky/strong but once i fitted the spacer it brought it back down to a more smooth liniar pull as it was before, also it doesnt drop down a gear as quickly if u deside to punch it.

other than that i thought the exhaust note has changed slightly

ok what i noticed when i put the exhaust on it got very peaky/strong but once i fitted the spacer it brought it back down to a more smooth liniar pull as it was before, also it doesnt drop down a gear as quickly if u deside to punch it.

other than that i thought the exhaust note has changed slightly

Bingo!

Exactly what I found, don't need to lean on it as hard to get the same performance either. You'll likely see a slight improvement in economy; once the novelty wears off...:ph34r:

my coilovers turned up today so far only managed to get the fronts in, i'll finish it tomorrow and see how it sits but its looking rather low atm....... its about 50mm lowered, might have to bring it back up a bit :ph34r:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...