Jump to content
SAU Community

Recommended Posts

Hey Russ if you get stuck i have a r32 subframe sitting at home if you get desperate, needs bushings though, a couple of them are cracked/leaking. Otherwise its had an easy life. Most of the rear suspension is still bolted to it though, but can be quickly ripped off with impact wrench. Also various gtr/gtst diff housing and centre/gears.

Well shakedown 2 didn't go too well. Only got 2 sessions in at PI on saturday

You and me both....although for diff reasons. I went to Sandown and was gentle on the motor for the first two sessions checking knock and temps etc...then the rain hit and out went my chance of a PB :(

No matter as I enjoyed the entry to the front straight ;) and I will live to fight another day!

Good luck with the prep/fixes.

I'm in open class.

Haven't tested a GTR cooler yet coz of the need to modify piping. Lots of time has gone into piping so don't wanna have to redo it if there is a better option. Thanks for the offer though.

well i have just upgraded to a 4" thick core for my car so i have the old "hybrid GT spec" branded 600x300x76 (3" in and out) bar and plate core spare.

though if you are looking for a tube and fin design thats not much help.

well i have just upgraded to a 4" thick core for my car so i have the old "hybrid GT spec" branded 600x300x76 (3" in and out) bar and plate core spare.

though if you are looking for a tube and fin design thats not much help.

Ok. What power has it 'flowed'? what's the length end to end? How much?

Put a STD GTR cooler in it Russ! Best flow kw wise and they actually allow air threw to ur rad which is a big problem with all these crappy aftermarket tube and fin/bar and plate coolers!

Just did similar upgardes to my thing, High mount and GTR cooler now making an easy 320kw and running 30 degrees cooler at Sandown!

  • 2 weeks later...

Seems like you did okay at winton today Russ, you feeling better prepared for Super Lap now?

Yeah mate. Very happy to get a 1:33.7 at winton. Consistent 1:34's with a turn in understeer problem is great. understeered wide at turn 6 (last right kink before the cleavage) and hit a saw tooth ripple strip. Need another alignment now. It wouldn't turn right properly after that :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...