Jump to content
SAU Community

Recommended Posts

how many bolt ons can i put on my rb25 (plenum, exhaust manifold, turbo etc) before i have to go for a new ecu? got a heap all the bits lyin in my shed ready for it, just dont know what i can get away with without upgrading to a haltech or similar :wacko:

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/
Share on other sites

Turbo back exhaust, front mount intercooler and 10psi boost will usually be about the limit of the stock ECU without hitting the major ECU limits.

Usually this would yield you around 165-175rwkw. I made 170rwkw with a fairly nice power curve without hitting any ECU safety features.

Having said that every car is slightly different so you may still run into problems (especially on a cold night).

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5828811
Share on other sites

I always find it amazing how many people want to avoid getting an ecu... Ecu was one of the first things on my list. Makes such a big difference, not just to power but to drivability and fuel economy.

Why not get an ecu and find improvements everywhere?

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5828831
Share on other sites

thanx for the input guys, i DO plan on getting a new ecu, just the parts i have came with the car. living in a small country town kinda makes it hard to get the thing tuned tho, is it worth goin all out for a pfc, haltech or similar? im not chasing huge power, its my everyday car, just sumthin thats a bit of fun, maybe round the 200-220rwkw mark. my gf drives the car too, so i dont want it scarin the sh!t outta her :rofl2: any help would really be appreciated!!!

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5830834
Share on other sites

LOL, my missus was driving my car one day and a car that was on and off the brakes in front was giving her the shi ts, she said she wanted to overtake them and I said "go for it", she dropped it down to second and floored it, LOL, the car hit boost went sideways and she shAT herself, said my car was "stupid" and hasnt driven it since.

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5830902
Share on other sites

thanx for the input guys, i DO plan on getting a new ecu, just the parts i have came with the car. living in a small country town kinda makes it hard to get the thing tuned tho, is it worth goin all out for a pfc, haltech or similar? im not chasing huge power, its my everyday car, just sumthin thats a bit of fun, maybe round the 200-220rwkw mark. my gf drives the car too, so i dont want it scarin the sh!t outta her :rofl2: any help would really be appreciated!!!

See that is a big issue that a lot of the guys living in major cities don't always understand. An ECU upgrade can be great, however if you don't have any one to go to makes it kind of pointless lol.

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5831181
Share on other sites

You can add an exhuast without hitting problems, well I didn't anyway.

I currently have all the basic mods (exhaust, boost tee, FMIC & POD) + a SAFC 2 & the car made 180rwkw when it was tuned about 1.5 years ago, no problems what so ever.

If you are not aiming for more power, SAFC is a budget option if you just want a quick solution to get rid of any R&R problems that may occur.

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5831246
Share on other sites

Do what it takes to get a Nistune fitted and tuned. Looking at your list if you don't need new injectors or afm you should be able to fit all that keep the boost low and drive to the tuner to get the Nistune fitted and tuned. As you will need a Z32 ecu you can get the nistune chip installed beforehand and then just plug it in and get the tune.

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5831336
Share on other sites

cooma is only an hour south of canberra. heaps of tuners here.

ppl will drive futher than that in sydney to go to their tuner..

Oh, I didn't really look where he was from, I just ment in general. But yeah if he is that close than no problem at all.

Get NIStune, wideband, a laptop and start learning :P

This. Learning to tune isn't that hard, just takes patience and practice.

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5831407
Share on other sites

The big diff is, if we f**k it up we have no one to go to to get it sorted. Have to put it on a trailer and then tow it 200km. Plus its not like you have a mate round the corner that knows how to do it and can show you. No safety net.

If we were to learn, we would be self taught and then some! and mistakes could be expensive.

Last thing you want to do is have to sell your car on Carsales - needs a tune!!!

Plus, I got a dyno + tune and it works so why muck it up?

I'd like to tune my own and have been considering getting a wideband and knock sensor, but then I'd need to use it, so on hold for now.......if anyone moves to town with the right skills, I'd probably do it.

Until then I stick to the mechanical stuff.

Link to comment
https://www.sau.com.au/forums/topic/365314-bolt-ons/#findComment-5832442
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...