Jump to content
SAU Community

Recommended Posts

Just got back from the Liberty club dyno day at Edge Motorworks, i'm buggered after strapping 23 awd cars down to the dyno but what a great day.

Anyway, my winning result was 341.1kw at around 23psi, just shy of my 350kw goal. Cihan (my tuner) decided not to push it further as the compressor was out of flow again and he doesn't want to see me brake it for no reason. Very happy with the result though, its unbelievable to drive and it's a stupidly responsive turbo for the power output. Also good to hear that the Edge dyno is comparable in output to many of the other local tuning shops.

Shame I didn't get the torque graph, you can plainly see the compressor flow dropping off as efficiency goes out the window.

post-63525-0-48565900-1336227992_thumb.jpg

Awesome effort once again Scotty; you must be stoked with the result. :thumbsup:

Never ceases to amaze me just what you've been able to acheive with this car; sure has come a long way since that 180ish kw dyno run!

Well done.

Edited by Daleo

Awesome effort once again Scotty; you must be stoked with the result. :thumbsup:

Never ceases to amaze me just what you've been able to acheive with this car; sure has come a long way since that 180ish kw dyno run!

Well done.

Thanks Dale. :)

Generally in 4th gear you wouldn't have anything below that sort of speed, its not like you take off in 4th from the lights. The goal is to have at least 4000 revs of usable power then select the correct gear to use it.

Obviously this is much laggier than the stock setup but above 4000 revs it is very responsive, boost hits instantly. its only below that where is comes on slower but it is still acceptable in my eyes, remember most of the highflow turbos going in are around the same wheel size, mine just has a larger rear housing for flow.

Ok thanks for the explanation. When do you get boost in 1st gear then? I can't imagine what it's like to drive our cars with a laggy turbo as they seems such slugs until boost kicks in. I imagine yours would be a whole new ball game with a manual box in it. Are you still considering this?

What did you Rev it out to? I would have thought top of 4th would be over 200. Guess I'll see on the dyno on the weekend. Didn't look at the speedo last time.

The dyno has a speed restriction of 200kph, I have no idea what revs its at when it hits that. Seeing we run the same diffs can you let me know? Are our gearboxes the same ratio?

Ok thanks for the explanation. When do you get boost in 1st gear then? I can't imagine what it's like to drive our cars with a laggy turbo as they seems such slugs until boost kicks in. I imagine yours would be a whole new ball game with a manual box in it. Are you still considering this?

Boost in first is absolutely useless, especially in rear drive. (It will light up second in the dry) Usually around 5k I would say at a guess. Remember though, I have a 4k stall converter once boost ramps so once the initial second of nothing has passed it is always on boost, whatever gear i'm in.

It was interesting going up a hill on the freeway in the wet the other day, just leaning on the throttle, and as boost ramps the car stepped out at 100kph in 4th. :blink: I need the front diff in soon, before winter hits.

gear ratios'

PNM35

Drivetrain

Driving Wheel - Gear_ratio 1st Gear 3.540 2nd Gear 2.264 - 3rd Gear 1.471 4th Gear 1.000 5th Gear 0.834 Reverse 2.370 Final Drive Gear Ratio 3.538

NM35

Drivetrain

Driving Wheel - Gear_ratio 1st Gear 3.540 2nd Gear 2.264 - 3rd Gear 1.471 4th Gear 1.000 5th Gear 0.834 Reverse 2.370 Final Drive Gear Ratio 3.133

So yes we should be the same ratio's depending on your rolling diameter.......4th gear should just about be smack on 220-230km/h for you!

Edited by Jetwreck

You mean like a few weeks ago?? :rolleyes:

At least you guys can drive...try public transport in this shitty weather...

At least you have public transport

I have to walk to work 65kms each way... in the snow... uphill... :P

Both self inflicted so no sympathy here. lol.

The dyno has a speed restriction of 200kph, I have no idea what revs its at when it hits that. Seeing we run the same diffs can you let me know? Are our gearboxes the same ratio?

I'll check it out on the weekend and let you know.

Thanks Alex, it will be interesting to see how much of the graph is missing. Perhaps there IS a little more in it...

I don't think more lag would be a good idea, although I can still hit full boost in 5th on the freeway cruising thanks to the stally. I'm probably going down the built 3.5 path next, just to give you a run for your money Alex. When are you winding up the wick?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...