Jump to content
SAU Community

Recommended Posts

Mate just got a major defect pulling out of the panel shop. Didn't directly take a speed, and was going over it on angle and the cops pulled him up about 10 seconds later.

Got done for being too low, tint, walls, bump stops and tyre placard. Merry Christmas.

let me know if u want aircon, i can get volume builder prices.. quote for my alarm from RACV was $600 more with 2 less sensors.. from another alarm place was $200 extra and 2 less sensors as well :\

Yes please Kaz! What's brands can you get? I have nfi about air-con brands and quality so will have to do some research :D

Primus back in the 90's. Always a huge queue waiting for dialup technical support.

On the current topic so far very happy with the two Panasonic split systems I had installed a couple of months back.

Aircon will cost me $3k + install, which shouldn't be much with my mate doing the electrical and his mate doing the plumbing

Bike would cost me $250+$250 in licensing, then $4-5k for the bike, $250ish in rego, $1k-ish in gear

Would be out riding it and wouldn't need the aircon on...

hmmmmmm

Need both

Dam its hard to get off the line with my new car :domokun: Needs a tune so when I light them up off the line I can recover and overtake ;)

f**k me the ZF auto in performance mode is quick shifter though, pretty impressive.

Dezz bike is good fun, good to just get away from everything and take some "me" time. No phone, no radio, no stressing about work. It clears your head. And then you've got the adrenaline pumping if you want to go a little silly.

Dam its hard to get off the line with my new car :domokun: Needs a tune so when I light them up off the line I can recover and overtake ;)

f**k me the ZF auto in performance mode is quick shifter though, pretty impressive.

Dezz bike is good fun, good to just get away from everything and take some "me" time. No phone, no radio, no stressing about work. It clears your head. And then you've got the adrenaline pumping if you want to go a little silly.

people are gonna tell you auto is gay.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...