Jump to content
SAU Community

Recommended Posts

No it's not, I was getting chased by highway patrol through Campbellfield industrials just before

Just made set of lights so he couldn't go through, there were cops everywhere

Just minding your own business in an industrial area hey Nick?

:ninja:

Tax return?

$(KGrHqR,!l4E87y3-05ZBPlU3vW0TQ~~60_35.JPG

+

ECA-red_180x131.gif

+

dyno.gif

Might have to do the same thing Birds, I don't think the sensor fuel lines are big enough though, does it have to plumb into the main fuel feed or is a secondary return line enough?

Not that I don't believe you were getting chased, but why would a cop car let a set of lights stop them from getting you? Last guy who got me went through 4 reds to pull me over for a "random" inspection*.

*later told me he'd spent the whole afternoon pulling over anything with four round tail lights, including Pat's 32.

Haha he was one of the better cops. Just told me to drop into vicroads to get the wheels inspected. Told me to throw on some stockies. No fine or Rwc required.

The one who EPA'd me is another story...

Might have to do the same thing Birds, I don't think the sensor fuel lines are big enough though, does it have to plumb into the main fuel feed or is a secondary return line enough?

Should be fine for flow, they don't look any smaller than fuel filter lines. If all you're using it for is to get a content reading, you could mount it anywhere in the fuel system. Most stick it in the return line, straight after rail; guess the less flow restriction you have going to the fuel rail, the better. Haltech have their own sensor which is more "inline" and having the same signal voltage, should also be compatible with the Zeitronix ECA:

$(KGrHqNHJ!sE+Nif0(JLBP1f1WD-9w~~60_12.JPG

and if it doesnt go ahead im just gonna put it up.

im over japan now.

i actually do want a ford.

I've found most 'JDM' owners go ford after getting over the jap cars

I was considering an evo, just the 4 cycl thing put me off :P also wouldn't really be any better cop wise

Get a tuned ford and you can have super fun times without the cop trouble, they handle better than you'd think - big cars for parking though

i'm done too... it's EVO time as soon as the boat sells

man i'm gonna miss going sailing though :/

i'll probably put it up in a week when i know how my job interview goes :D

another interview? within nab?

good luck bud. and nah just want to keep away from turbo and all of that shiz in general

I've found most 'JDM' owners go ford after getting over the jap cars

I was considering an evo, just the 4 cycl thing put me off :P also wouldn't really be any better cop wise

Get a tuned ford and you can have super fun times without the cop trouble, they handle better than you'd think - big cars for parking though

man no more modding for me. time to grow up and start investing instead of bunching the money up and throwing it at a bin.

probably just the later model ford. or just anything normal realy and not so modified. even the beamers have come a heap down in price.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...