Jump to content
SAU Community

Recommended Posts

I'm only running fmic and exhaust, boost sitting on 9psi after those mods.

Thought I'll be alright with 1.1mm since not running much power, shall re-gap to 0.8mm and perhaps coilpacks.

Misfiring better go away before deca!

If you don't have new coilpacks forget about 1.1mm

  

Yeh mate, 6 burner + Teriyaki hotplate + wok burner, with a side sink/chopping board. Runs twin gas bottles. lol.

two of the big ones..

i would be glad to come around with wagyu, but need to tend to jess.. as the drugs wear off she is in more pain lol

just use bscp6es or bcpr7es and gap to 0.8 at all times...

this has been the most proven plug / gap combo on SAU for like 10 years for almost every conceivable application.

I do not even come close to understanding why people insist on running 1.1 and then spend days arguing their point on the forums when it has been proven to be less effective, time after time after time.

we have this wealth of knowledge (including an 11ty billion page spark plug thread) for a reason

im planning on buying a Ghost HD next week and just thinking about using a GPS Laptimer and then overlaying the info to the video... Reading through a bunch of product pages (http://www.gps-laptimer.de/Features.html, racechrono) and none say if the footage has to be recorded with the phone or if it can be merged with a mpeg or something.

How does everyone else do it?

Track vision is a $150 program for PC that will let you merge the info... but you still have to record the data and film it as well :|

Yeah double check Anthony, you still have the standard boost solenoid don't you? Definitely unusual to spike 4psi with that.

Yeah definitely hitting 1.5 bar on full boost according to defi gauge

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...