Jump to content
SAU Community

Recommended Posts

Take them out and be done with em, looks better anyway. Just keep em as spares in case cops have a problem with it.

The sides of my front bar have a bit of flex without them in, the flap a little at speed... Also I want something there to protect the oil cooler core, so it doesn't get damaged by the rocks thrown at it by the drivers wheel.

Take them out and be done with em, looks better anyway. Just keep em as spares in case cops have a problem with it.

dirt goes every where in the engine bay in the door sills, it gets to a point that it scratches paint when you open doors..

I've seen it on heaps of cars when i roll the guards..

replace them, and add cable ties so they CANT come off.

I wouldn't pull the rear ones off, as they do stop crap getting in the door sill, but the front are fine to clear out. My engine bay is far from filthy and I've had them removed for nearly 3 years. Have driven some dirty ass roads too.

I believe it would happen on other cars, but the R33 Skyline is pretty insulated from crap getting in the engine bay that way. With that front guard lining removed, the worst you'll get is some dust on your intercooler piping and the loom inside the fender.

I just couldn't be fked sorting out castor and all that jazz to stop tyres from slowly burning through the guard linings at deca etc. No more scrubs for me...I don't want no scrubs...

Grant somehow, no guard roll has rub that sounds absolutely horrid on full lock but in like a month and a half has only managed to make the plastic a little bit shiny o.O

My 34 is a mystery thing...

Fuel gauge broken for 3 days and it works fine yesterday and today.

I wouldn't pull the rear ones off, as they do stop crap getting in the door sill, but the front are fine to clear out. My engine bay is far from filthy and I've had them removed for nearly 3 years. Have driven some dirty ass roads too.

I believe it would happen on other cars, but the R33 Skyline is pretty insulated from crap getting in the engine bay that way. With that front guard lining removed, the worst you'll get is some dust on your intercooler piping and the loom inside the fender.

I just couldn't be fked sorting out castor and all that jazz to stop tyres from slowly burning through the guard linings at deca etc. No more scrubs for me...I don't want no scrubs...

yeh fair enough..

the 200sx was a pain when i took out the fronts for the flare dirt got in every single place you could see..

i ended up putting them back and using a hot knife and carving as much as I could and cable tying it all down.

My 34 is a mystery thing...

Fuel gauge broken for 3 days and it works fine yesterday and today.

Lol my old 34 used to do that, sometimes it'd even show that it was full and still show the fuel light. :S

Yo Plattsy,

Those r33 front inner guards you're selling in your FS post, are they the black plastic guard liners in front of the wheel, and the bottom of them extend forward towards the front bar?

If so, want, shredded mine the other weekend while overtaking on the hume, popped out and ground away to nothing on the wheel :P

yep they are. come get em man.

I also had a fun fuel issue with my tank, driving along did 30km after filling up and tank suprisingly empty...

Then a couple minutes later (directly on the way to servo) I see it actually move from E with the light on.. to full in about 1/2 a second right as I drive into the servo.

Drive out, a minute later, on E again.

Give it the "are you serious" stare and it moves between E and F about 5 times in 5 seconds, just waving at me. Hasn't happened since (months ago..)

Stupid troll car

My 34 is a mystery thing...

Fuel gauge broken for 3 days and it works fine yesterday and today.

That stuff is usually earthing related. or general connections anyway.

eeeerggghhhh eaten too many jelly lollies. Black & Gold was a bad choice... but so cheap *eats another one*

It's interesting that 33s don't seem to have the same issues(the fuel guage may be inaccurate at times but it still works) considering everything tank side is exactly the same. I wonder if the issue is probably with the guage in the cluster itself?

I wonder if the issue is probably with the guage in the cluster itself?

When it's reading zero you could give it a thump, or wiggle the plugs at the back of the cluster to see if its a connection issue, wouldn't be the first skyline cluster to have issues ;)

Mine reads pretty badly, but its consistently bad so I can still tell what's what... Hitting the "E" means I've used about 35L, lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...