Jump to content
SAU Community

Recommended Posts

NSW guys also love cock as a daily

with visibility equivalent to this

and $5000 for something like a replacement or repair front bumper, i'd say its not an ideal daily IMO...

he has a 400+kw skyline for a weekender, i dont think many f**ks are given, its reliable and fun to drive.

he has a 400+kw skyline for a weekender, i dont think many f**ks are given, its reliable and fun to drive.

I'd like to point out that I personally have NOTHING against the lotus or using it on the roads as a daily...

I merely took the opportunity to point out the fact that most N.S.W. men enjoy the penis

cheeseburger society burgers look good... would def try.

also went to Fat Bob's t'other day and it was pretty good. long wait and expensive but very good.

still prefer to eat 2 x huxtaburgers and chips for the same price as 1 fat bobs though

I beleive dezzman is of a similar opinion

  • Like 1

I tend to make my own burgers most of the time cos I am boss and i like to drink beer at home

thus joy of burger trucks, grab burger, home in a couple minutes, drink beer.

I occasionally get beatbox kitchen when in port melb as can be home in under 5 min.

or Mr Burger when in Yarraville and home sooner.

I tend to make my own burgers most of the time cos I am boss and i like to drink beer at home

Invite next time please :P

Mr Burger have a shop on Chaps now as well. Have been meaning to go there.

burgers at home are just as quick and easy if you are prepared.

I buy all my fresh fruit, veggies and such from the market for the week and then get 2 weeks worth of meat from Tasman.

I always buy a bulk pack of premium mince and prep it for burgers.

I also go to Breadtop and buy 4-5 packets of savory rolls at a time and throw the packs in the freezer.

These are the absolute last word in awesome home burger buns and aren't even a little bit effected by the freezing process, just in the bags they already come in. they are small though, so you need to eat 2-4 each

The good thing about Tasman is that the way they pack their mince is directly from the mincer to the pack, so all the meat strands (and hence protien strands) are aligned and when not mixed up make unbeleiveable burger patties.

I get the mince and lay the strands (all facing the same way) on gladwrap to be a little bigger than the size of the buns and roll the shit up nice and tight to get a perfect pattie shape but with all the strands facing the same way. using a LOT of gladwrap.... a LOT

make a few logs and throw them all in the freezer too.

this process take like 5 mins at most.

To cook them, just remove from the freezer and once thawed enough cut into thick pattie slices (with the gladwrap still on and using a SHARP knife) and lay on bench to thaw properly and at room temp (doesn't take long after sliced)

heat a thick pan or the BBQ until red hot, salt the meat heavily with sea salt flakes and cook (still with the gladwrap on)

as soon as the gladwrap gets near the heat it shrinks and doesn't actually hit the heat and melt, cook one side, turn over and remove the gladwrap.

cook until still medium... and you have the most awesome burger pattie imaginable

Then I always ensure I have a pack of bega super slices in the fridge at all times (epic American burger style cheese) and can have burgers with minimal notice at any time.

the rest I change up based on what I feel like...

  • Like 1

burgers at home are just as quick and easy if you are prepared.

I buy all my fresh fruit, veggies and such from the market for the week and then get 2 weeks worth of meat from Tasman.

I always buy a bulk pack of premium mince and prep it for burgers.

I also go to Breadtop and buy 4-5 packets of savory rolls at a time and throw the packs in the freezer.

These are the absolute last word in awesome home burger buns and aren't even a little bit effected by the freezing process, just in the bags they already come in. they are small though, so you need to eat 2-4 each

The good thing about Tasman is that the way they pack their mince is directly from the mincer to the pack, so all the meat strands (and hence protien strands) are aligned and when not mixed up make unbeleiveable burger patties.

I get the mince and lay the strands (all facing the same way) on gladwrap to be a little bigger than the size of the buns and roll the shit up nice and tight to get a perfect pattie shape but with all the strands facing the same way. using a LOT of gladwrap.... a LOT

make a few logs and throw them all in the freezer too.

this process take like 5 mins at most.

To cook them, just remove from the freezer and once thawed enough cut into thick pattie slices (with the gladwrap still on and using a SHARP knife) and lay on bench to thaw properly and at room temp (doesn't take long after sliced)

heat a thick pan or the BBQ until red hot, salt the meat heavily with sea salt flakes and cook (still with the gladwrap on)

as soon as the gladwrap gets near the heat it shrinks and doesn't actually hit the heat and melt, cook one side, turn over and remove the gladwrap.

cook until still medium... and you have the most awesome burger pattie imaginable

Then I always ensure I have a pack of bega super slices in the fridge at all times (epic American burger style cheese) and can have burgers with minimal notice at any time.

the rest I change up based on what I feel like...

fark you just made my mouth water you kent.

and ive got a spinach and ricotta pastie for lunch. vegetarian shite.

+1 for tasman meats.

+1 for market food but fark I hate going to dandenong market most of the time. parking + fighting through the crowds isnt fun. Shame south melbourne isnt as close as it used to be :( good boutique beers there too. Cant find Metal Head Porter anywhere!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...