Jump to content
SAU Community

Recommended Posts

used to go vic market, however have been going here for the last year(ish)

http://moorabbinwholesale.blogspot.com.au/

huge fresh fruit/veg market right near home = winning

burgers at home are just as quick and easy if you are prepared.

I buy all my fresh fruit, veggies and such from the market for the week and then get 2 weeks worth of meat from Tasman.

I always buy a bulk pack of premium mince and prep it for burgers.

I also go to Breadtop and buy 4-5 packets of savory rolls at a time and throw the packs in the freezer.

These are the absolute last word in awesome home burger buns and aren't even a little bit effected by the freezing process, just in the bags they already come in. they are small though, so you need to eat 2-4 each

The good thing about Tasman is that the way they pack their mince is directly from the mincer to the pack, so all the meat strands (and hence protien strands) are aligned and when not mixed up make unbeleiveable burger patties.

I get the mince and lay the strands (all facing the same way) on gladwrap to be a little bigger than the size of the buns and roll the shit up nice and tight to get a perfect pattie shape but with all the strands facing the same way. using a LOT of gladwrap.... a LOT

make a few logs and throw them all in the freezer too.

this process take like 5 mins at most.

To cook them, just remove from the freezer and once thawed enough cut into thick pattie slices (with the gladwrap still on and using a SHARP knife) and lay on bench to thaw properly and at room temp (doesn't take long after sliced)

heat a thick pan or the BBQ until red hot, salt the meat heavily with sea salt flakes and cook (still with the gladwrap on)

as soon as the gladwrap gets near the heat it shrinks and doesn't actually hit the heat and melt, cook one side, turn over and remove the gladwrap.

cook until still medium... and you have the most awesome burger pattie imaginable

Then I always ensure I have a pack of bega super slices in the fridge at all times (epic American burger style cheese) and can have burgers with minimal notice at any time.

the rest I change up based on what I feel like...

Googling nearest Tasman. Doing this next weekend.

oh there. always driven past, never been in. thought it was more about buying bulk food for green grocers. Will have to check it out as its not far from home either. they open Saturdays?

Finally got invited to a christmas function. drinks at Riverland at Fedsquare for the project team im contracting to. Got encouraged to "network"... pfft yeah right. Sink pots till from 3-6pm and then bail. ill be lucky to rock up in a collar. anticorporatelyf

burgers at home are just as quick and easy if you are prepared.

I buy all my fresh fruit, veggies and such from the market for the week and then get 2 weeks worth of meat from Tasman.

I always buy a bulk pack of premium mince and prep it for burgers.

I also go to Breadtop and buy 4-5 packets of savory rolls at a time and throw the packs in the freezer.

These are the absolute last word in awesome home burger buns and aren't even a little bit effected by the freezing process, just in the bags they already come in. they are small though, so you need to eat 2-4 each

The good thing about Tasman is that the way they pack their mince is directly from the mincer to the pack, so all the meat strands (and hence protien strands) are aligned and when not mixed up make unbeleiveable burger patties.

I get the mince and lay the strands (all facing the same way) on gladwrap to be a little bigger than the size of the buns and roll the shit up nice and tight to get a perfect pattie shape but with all the strands facing the same way. using a LOT of gladwrap.... a LOT

make a few logs and throw them all in the freezer too.

this process take like 5 mins at most.

To cook them, just remove from the freezer and once thawed enough cut into thick pattie slices (with the gladwrap still on and using a SHARP knife) and lay on bench to thaw properly and at room temp (doesn't take long after sliced)

heat a thick pan or the BBQ until red hot, salt the meat heavily with sea salt flakes and cook (still with the gladwrap on)

as soon as the gladwrap gets near the heat it shrinks and doesn't actually hit the heat and melt, cook one side, turn over and remove the gladwrap.

cook until still medium... and you have the most awesome burger pattie imaginable

Then I always ensure I have a pack of bega super slices in the fridge at all times (epic American burger style cheese) and can have burgers with minimal notice at any time.

the rest I change up based on what I feel like...

Mmhmmm... this IS a tasty burger

Googling nearest Tasman. Doing this next weekend.

remember to make sure the meat is all facing the same way and maybe a diameter of 1 cm BIGGER than the bun (will shrink when coooked) and to wrap it nice and evenly with a lot of clingwrap

also having an industrial sized 600m roll of clingwrap helps

Mmhmmm... this IS a tasty burger

You mind if I have some of your tasty beverage to wash this down?

christmas part #3 tonight,

no one was all nurses

no two, my upper management so had to behave,

tonight is the office one SO noone from my department or above, will be mainly Asian girls who don't drink so the bar all mine!

A friend of mine was a Mi Goreng regular back in the day, then went off it for ages.

returned a year or so later to it and couldnt believe he used to eat the stuff.

Maccas is in the same boat. i feel ill after a burger so will stick to the icecreams.

government should impose a tax on mcdonalds (or even just big brand fast foods) like cigarettes or something.

Sucks to be you lot; I enjoy my $8 salt meal prepared in 3 minutes. Always hits the spot as an alternative to a greasy ass kebab or souvlaki. It's a frikken burger, why get snobby and hipster over it. Meat, cheese, bun, other shit.

A friend of mine was a Mi Goreng regular back in the day, then went off it for ages.

returned a year or so later to it and couldnt believe he used to eat the stuff.

Maccas is in the same boat. i feel ill after a burger so will stick to the icecreams.

government should impose a tax on mcdonalds (or even just big brand fast foods) like cigarettes or something.

Haven't had Mi Goreng in a while. But I don't have a problem eating it again lol

Sucks to be you lot; I enjoy my $8 salt meal prepared in 3 minutes. Always hits the spot as an alternative to a greasy ass kebab or souvlaki. It's a frikken burger, why get snobby and hipster over it. Meat, cheese, bun, other shit.

because better is better

simple concept

better1


ˈbɛtə/


adjective


adjective: better


1.

more desirable, satisfactory, or effective.

"we're hoping for better weather tomorrow"



synonyms:

superior, finer, of higher quality, greater, in a different class, one step ahead;
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...