Jump to content
SAU Community

Recommended Posts

Simon why you installing beta bios' for? it might rub off on you brah

I'd like to suggest that Simon's betaness rubbed off on his alpha bios, hence the issues...

GPU didn't wanna give up dat pussy

Because the App isn't written by us, it's a themed version of Tapatalk, the IPB3 mobile app.

Also, lold at the 2nd post here :P Bloke's got his priorities straight...

http://www.skylinesaustralia.com/forums/topic/442499-vic-cars-and-coffee-meet-sat-3rd-may-2014/

Because the App isn't written by us, it's a themed version of Tapatalk, the IPB3 mobile app.

Also, lold at the 2nd post here :P Bloke's got his priorities straight...

http://www.skylinesaustralia.com/forums/topic/442499-vic-cars-and-coffee-meet-sat-3rd-may-2014/

You're going to check out its services?

Ethanol is better than petrol. The end

this is true, but heres something you may find ineteresting

pulled my rail and injectors out a few months back...just wrapped in cling wrap and stored it..

pulled it out today and pulled it apart and found this

10401376_10152471313116499_25587883100311797547_10152471313676499_57588556695102

just looks like sugar...it dissolves in the hand straight away so I doubt it would be doing any damage, but left sitting in your.rail for extended periods you wonder if it could make it hard to start...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...