Jump to content
SAU Community

Recommended Posts

3" fujitsubo legalis.

im wrapt with the power though.

My 3inch wasn't even a 1kw restriction when we tested at 320-330rwkw on 98 octane.

And wasn't a restirction at 380rwkw on E85

Just sayin

  • Like 1

Not all 3 inches are created equally

Moh are you running a cat...if so, ditch that...

Cooler piping and cooler is always an obvious one

Intake pipe sucking shut is never good

Sometimes the turbo you've chosen can have a restrictive exhaust housing particularly if it's a responsive turbo and gets choked up top

That power is plenty for the street, hit up E85 and be laughing

i do have a decat.
ill throw some intercooler hardpipes on this bitch when i can.
wouldnt be intake pipes, george is making about 400kw with stock intake pipes and cooler.

my problem is i dont want a cannon, and all the free flowing exhausts are cannons.
also will need cam gears, and may go for a set of cams while im there. because mohsen.
but most importantly, ill have to drive it for a bit and get used to it.

Don't understand why workshops if they say its an exhaust issue, just don't quickly test it by dropping the exhaust. (As long as the customer is happy to pay for the extra time)

Would suck for Moh and other customers if they bought a whole new exhaust system only to come back and have the exact same issues

i do have a decat.

ill throw some intercooler hardpipes on this bitch when i can.

wouldnt be intake pipes, george is making about 400kw with stock intake pipes and cooler.

my problem is i dont want a cannon, and all the free flowing exhausts are cannons.

also will need cam gears, and may go for a set of cams while im there. because mohsen.

but most importantly, ill have to drive it for a bit and get used to it.

You have 707160 -9s yeah?

Should make 300+ at 18 especially with rebuilt motor.

they didnt say it was exhaust, not sure whats up. the car has been an absolute bucket of shit.
my first build experience has been nothing but a nightmare.

just random shit that shouldnt have happened. eg: f**king vac leaks everywhere.

they didnt say it was exhaust, not sure whats up. the car has been an absolute bucket of shit.

my first build experience has been nothing but a nightmare.

just random shit that shouldnt have happened. eg: f**king vac leaks everywhere.

You did replace every vacuum hose on the engine while it was out though? Right?

3" fujitsubo legalis.

im wrapt with the power though.

Generally Fujitsubos have a narrowed down part of the piping just before the rear muffler to keep things quite despite being a 3" system, even their cannon systems have this

Also 2nd spot of the new falcon today (first on saturday night at ribs & burgers in Cragieburn)

Digging the bronze colour much more than the blue, looks more like a BA/BF shape again though

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...