Jump to content
SAU Community

Recommended Posts

Exhaust, tune, and enough boost should yield anywhere up to 300, that'll keep me entertained. Not sure about stock power, maybe 180 or so. It's massively held back from factory

Feels good Alex, cops / other hoons seem unaware which suits me fine. Trying to fly under the radar after the theft

On my old 335i, I had:

JB4

Downpipes.

Air filters.

Charge pipe.

Meth kit.

That got it to exactly 300rwkw. If you have the n54 engine, just get ready for HPFP and Injectors to die lol....

Nah not much cheap going around here depending what you wanna spend Id investigate waterline in Williamstown new development of apartments hot location long settlements can't go wrong

Trust me I'm a salesman!

Have you got dual clutch ric?

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

multi million dollar apartment, kgo

Have you got dual clutch ric?

Nah I've got dual balls so bought a manual ;)

On my old 335i, I had:

JB4

Downpipes.

Air filters.

Charge pipe.

Meth kit.

That got it to exactly 300rwkw. If you have the n54 engine, just get ready for HPFP and Injectors to die lol....

Already replaced under warranty thankfully! How'd you find it at that power level?

On my old 335i, I had:

JB4

Downpipes.

Air filters.

Charge pipe.

Meth kit.

That got it to exactly 300rwkw. If you have the n54 engine, just get ready for HPFP and Injectors to die lol....

Nice

If the 4 door weren't so ugly it would be on the consideration list

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

Not sure man it's not my core area but it's blue chip so I think you'd get a decent return

Nah I've got dual balls so bought a manual ;)

Already replaced under warranty thankfully! How'd you find it at that power level?

Very good.

Power was linear and it was a fair bit quicker than the e93 m3 that I replaced it with.

Best of all, it wasn't too expensive, all up it cost around 3 to 3.5k including labour.

Nice

If the 4 door weren't so ugly it would be on the consideration list

Yeah the e90s look a bit dated now. That said I've seen some nice examples...

  • Like 1

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

Decisions shouldn't always be around tax

Just because you get about 30cents back for ever $1 you spend doesn't mean you always should

Know what I mean jellybean

  • Like 1

Not sure man it's not my core area but it's blue chip so I think you'd get a decent return

I'll speak to Jess about it... she was gonna handle my rental anyway..

Decisions shouldn't always be around tax

Just because you get about 30cents back for ever $1 you spend doesn't mean you always should

Know what I mean jellybean

Not really, no.

But yeah obviously there's more to it than tax benefits...but if the rent is a good amount, and there's demand to rent there, then in theory it should be ok..

Rental prices dropping in clayton.

Went from house on half-block in clayton to same size house on bigger block + outdoor area and garage in rowville for $50 less a week.

Old house was on the market for over 6 weeks and had to drop $20 a week to fill it.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...