Jump to content
SAU Community

Recommended Posts

just bare in mind here fellas, the gps hardware shit you use on your phone, is a once calibrated piece of junk.

use a seperate designed for piece of equipmunk, and make sure its calibrated.

also, enviroment plays a huge part in gps signal. so dont just rely on that.

not saying whats above is wrong, just giving you all the info.

don;t use the gpn on the phone,

I use an external 10Hz GPS reciver liked to racechrono on android.

the lap times are withing .1 of a second of the track ones, (think it more due to the start stop line in racechrono is not the same as the beam they use for our track days)

so think the results are fairly accurate.

assumed that but thought would clarify.

when I used the GPS jsut on the phone times were more than a sec out from lap times, the external GPS as mentioned brought it down to sub .1 so I'm happy for the time being.

  • Like 1

If you need to be accurate to less than 1/10 of a second for recreational racing... you need to get a life lol

If you want an accurate representation of how well a different line through a corner effects your time, then having an accurate GPS is pretty important.

I use a 10Hz Bluetooth module as well, stuck to the top of my windscreen, because I have my phone wrapped up in my centre console and GPS Reception when you're inside a big metal cage isn't ideal.

Lap times can be within a 0.1 seconds... however things like top speeds and corner speeds go absolutely retarded if you've got a poor signal and it thinks your bouncing all over the track.

What if you drive a BNR34

Them you don't need to be timed as that is below you. You already know you are the fastest. Even faster than the RWD guys going faster than you

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...