Jump to content
SAU Community

Recommended Posts

<3 my fumoto drain valve, still going strong after 5 years

Don't like your neighbour? Piss on his lawn with oil

Then sit there for 5 mins while you refill your car with oil and he asks what the f you're doing with a loud skyline on his property...

never really got those,

takes a few sec to remove a sump plug...

go have a beer and do something interesting.

come back few sec later sump plug back in place.

so it saves you a crush washer but in reality takes longer.

meh

still don;t trust a ripple strip vibrating one loose..

Realistically it takes a few minutes to get a spanner, reach under car and locate it to remove a plug and then have the oil piss all over it / bolt potentially fall in the pan, then replace the washer and clean the thread before putting it back in. I chuck a pan under the car and flick a switch. Mess free oil change anywhere anytime. It's handy for cleanly draining oil overfills too.

As a fastener it's no different to a sump plug so can't think ripple strips would hurt it any more than a sump plug. For that matter I doubt ripple strips would be any worse than some of the corrugated gravel roads I've driven on either. It's fun having a quick, hail-damaged daily driver and not caring too much what you drive it on.

Anyway, I don't really need to sell it on its merits, but I do think they are worth having if you do regular oil changes; might be one of those have to try it things.

Realistically it takes a few minutes to get a spanner, reach under car and locate it to remove a plug and then have the oil piss all over it / bolt potentially fall in the pan, then replace the washer and clean the thread before putting it back in. I chuck a pan under the car and flick a switch. Mess free oil change anywhere anytime. It's handy for cleanly draining oil overfills too.

As a fastener it's no different to a sump plug so can't think ripple strips would hurt it any more than a sump plug. For that matter I doubt ripple strips would be any worse than some of the corrugated gravel roads I've driven on either. It's fun having a quick, hail-damaged daily driver and not caring too much what you drive it on.

Anyway, I don't really need to sell it on its merits, but I do think they are worth having if you do regular oil changes; might be one of those have to try it things.

post-10032-1427378500255_thumb.jpg
  • Like 1

Hey guys, what's the difference between the 52T and 56T for the Garrett GT3076R? I'm looking at running two of them for my TT setup on zee 6L but Commodore blokes are useless with turbos.

Aiming for the 500rwkw mark if that's any help?

seriously doe, speak to Tao from hypergear and ask him about it.

He recently made 2 custom turbo's for Cat's LS1TT that makes huge power and they are right on the money

i'm going to take a wild stab that the 56T is larger

seriously doe, speak to Tao from hypergear and ask him about it.

He recently made 2 custom turbo's for Cat's LS1TT that makes huge power and they are right on the money

Cheers mate, I heard the 56T was larger too but not sure in what regards though? Is it to do with the impeller?

Also, if I'm not running Garretts, my tuner has reccomended Turbonetics. Haven't heard much about Turbonetics on SAU so thoughts?

Hey guys, what's the difference between the 52T and 56T for the Garrett GT3076R? I'm looking at running two of them for my TT setup on zee 6L but Commodore blokes are useless with turbos.

Aiming for the 500rwkw mark if that's any help?

waaaaahhhht

dont like the supercharger? whats re-sale on something like that... shiiiet

waaaaahhhht

dont like the supercharger? whats re-sale on something like that... shiiiet

I LOVE the supercharger! Very snappy and loads of fun. But I got over it and want to get back behind a turbo (two of them at least anyway).

Don't wanna discuss price but the buyer is gettting A LOT of bang for buck.

Put it this way: I chucked it up for sale on a couple Facey buy/sell pages and had 4 calls regarding it within 24 hours (2 were interstate, where 1 was prepared to drive down from NSW to pickup that weekend if I could get the blower off in time).

Hey guys, what's the difference between the 52T and 56T for the Garrett GT3076R? I'm looking at running two of them for my TT setup on zee 6L but Commodore blokes are useless with turbos.

Aiming for the 500rwkw mark if that's any help?

Pretty confident both would make your goal easily, on around 6psi most likely. ;)

  • Like 2

Pretty confident both would make your goal easily, on around 6psi most likely. ;)

Sweet! But is there a spool difference between 52 and 56? (Like that's even a legitiment concern on a V8 LOL)

Only 6psi?! I was hoping to run about 15psi on E85 LOL

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...