Jump to content
SAU Community

Recommended Posts

Ive been having a a fair look at turbo-ing my car recently and all the ways in which to do it. And then I thought along the lines of a new car and thought id get peoples opinions on whether its best to Start with a turbd skyline or get a rolling shell and build it up? Id eventually be looking to replace most stock parts with slightly better options because i'd like to be fast but not become a track demon or anything.

What are peoples thoughts on it? also would be good to get a perspective through cost and then if cost wasn't an issue?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/381476-better-to-buy-or-build-up/
Share on other sites

Depending on what you buy......a good r33 GTR with say 350kw goes for $30-40K. If you did that yourself you could spend close to that on just the mods alone. The car will still set you back +$20-25K. And its relative, so any car will be similar give or take.

The only thing you miss out on is the learning experience and the 'built not bought' edict. But you'll have a lot of skun knuckles, late nights and downtime achieving it.

Well ideally im not looking for a GTR i just want something like a 97 or 98 R33. If i bought It I just want it to be turbo with reasonable k's but i figure build it is buy a beater and replace its engine etc

Ok, then expect to pay $15-$20K for a good one [you can get cheaper, but I did say a good one]. I have a '98 and I gave up keeping a running total at $20K. And I noted everything down, if it was for the 'line then I added it to the total.

Honestly there are absolute sub $20K 300rwkw bargains out there in the Gtst range, and in very good to pristine condition - but take your time and shop around, its a buyers market.

I suggest buying one with most things donethen adding your own touch I wish I did that now. I bought my 32 for 3 k and now spent 6 on it and I havent even touched suspension yet unless your like me and want to be able to say I built this car myself then spend the money on a mostly done one

Buying a modified car is the cost effective way to do it. You can save many thousands of dollars that way (save $10 to $15K or more).

The key is patience. Keep an eye on the forums - find a really good car with not too many miles on the new engine.

If you want ot personalise it or money is burning a hole in your pocket there is always more you can do!

Buy one already done, then spend a few k getting it up to your standard, that way it is the way you want it and it didn't cost a bucket. If you buy one and mod it yourself it is such a money pit.

The other option is to buy a defected car or a GTR with a blown motor and do the engine swap yourself, this way you save massively on the buy price however you have to be capable of doing the work yourself.

yeah one already done will have half the bits you will want already on it..

So even if you do have to rebuild it at least it had lots of good parts already..

I now have a pile of stock parts in he shed that are good for nothing and a 20+k bill, I have seen cars with as much or more power selling for half that..I would probably be lucky to sell it for 10k and even then it has to clear a RWC somehow somehwere

See the big problem can be getting them transferred into your name if the car has alot of modifications..But if you know the right people and have access to borrowed parts for a RWC you can get around this, meaning you could buy something even cheaper because the previous owner couldn't bother to clear a defect or RWC..

my mate got a pretty good deal

r33 s1

forged motor + hks 2530 (i think) and all the supporting fruit ~ 280-300 rwkw (i forget now)

+ suspension stuff sorted too

$7k

only downside is it had peeling clear coat

hunt around and make the decision on whats available to you, if there aren't any decent ones about then you might have to build your own

Look around, then decide....

The build that I wanted, I havnt really seen done.

so, I'm building my own.

I also didn't have the money to spend on a moded one when I first got my car 5 years ago.

Definitly would have saved money buying a car that was already done.

If you've got the money, I recommended buying as close as you can get to what you want.

If you're chasing something that's a bit left field, build it yourself.

Either way you decide, goodluck with the new car.

And post pics when you get it :)

yeah one already done will have half the bits you will want already on it..

So even if you do have to rebuild it at least it had lots of good parts already..

I now have a pile of stock parts in he shed that are good for nothing and a 20+k bill, I have seen cars with as much or more power selling for half that..I would probably be lucky to sell it for 10k and even then it has to clear a RWC somehow somehwere

See the big problem can be getting them transferred into your name if the car has alot of modifications..But if you know the right people and have access to borrowed parts for a RWC you can get around this, meaning you could buy something even cheaper because the previous owner couldn't bother to clear a defect or RWC..

^^This.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...