Jump to content
SAU Community

Recommended Posts

  • 3 months later...

New results from a fellowzedder with gtx2863's. First graph was previous. 2nd graph are the new initial dyno results.

Snapped intake cam (twice now) so he changed out all 4 cams for stock exhaust cams (solid, no VTC anymore). New mufflers also and even bigger throttle bodies (58mm to 62mm).

 

[âIMG]

[âIMG]

  • 3 years later...

A bit of a zombie thread bump but I seen these turbos being shown by Spectrum Motorsports Solutions here in Canada and though they were interesting. How much of a difference will having anti surge housing make vs just standard housings

272951940_615829429525568_5950475535470813824_n.jpg

272726776_387444479851231_6234949020222769217_n.jpg

The surge slot is not there to improve performance. It is because GTX28 comp wheel will bend its shaft in solid housings, the surge slot is made preventing that problem. It looks like a T51R style sort of a insert, should make some induction noises.

Anyway, Result from an earlier highflow we did. Red line is with solid housing, and blue is with antisurge slot. From a S15, internally gated on E85 fuel

 

 

247125811_1899153450256247_7125461482544349490_n.jpg

269866300_626144128834156_7132807344569484046_n (1).jpg

Edited by hypergear
  • Like 2
On 2/24/2022 at 6:18 AM, hypergear said:

The surge slot is not there to improve performance. It is because GTX28 comp wheel will bend its shaft in solid housings, the surge slot is made preventing that problem. It looks like a T51R style sort of a insert, should make some induction noises.

Anyway, Result from an earlier highflow we did. Red line is with solid housing, and blue is with antisurge slot. From a S15, internally gated on E85 fuel

Any thoughts on the 42R compressor map they have? Seems pretty average to me but I haven't done a detailed comparison against others.

On 2/23/2022 at 3:47 AM, GTSBoy said:

Um....no? That's just twin scroll single turbo, isn't it?

BMW in classic fashion decided that TwinPower could either mean a single twin scroll turbo or two turbos. I still have yet to figure out why they bother with twin turbos on the M3 when it seems obvious to just slap a bigger single turbo on the B58 and call it an S58.

On 2/26/2022 at 7:55 AM, joshuaho96 said:

BMW in classic fashion decided that TwinPower could either mean a single twin scroll turbo or two turbos

Nah, they actually use both words, in both orders, to mean two different things. One order means twin turbo, the other means twin scroll single. They is classically f**ked over by marketeers. Engineers would tell them to go f**k themselves if they had the balls and the corporate power hadn't been usurped by the business school grads.

  • Like 1
On 2/25/2022 at 6:47 PM, GTSBoy said:

Nah, they actually use both words, in both orders, to mean two different things. One order means twin turbo, the other means twin scroll single. They is classically f**ked over by marketeers. Engineers would tell them to go f**k themselves if they had the balls and the corporate power hadn't been usurped by the business school grads.

718191700_ScreenShot2022-02-25at8_08_15PM.thumb.png.1824290f6935e938355eceb520fddc50.png

From: https://www.bmwusa.com/vehicles/m-models/m3-sedan/overview.html

On 26/02/2022 at 10:55 AM, joshuaho96 said:

twin turbos on the M3

Because it sounds cool on paper but in reality sounds aids (literally), a M3 with an exhaust sounds horrible. Kind of a reminds me of a stock turbo R32-34 with a loud exhaust, just sounds dreadful.

On 2/26/2022 at 12:51 PM, Dose Pipe Sutututu said:

Because it sounds cool on paper but in reality sounds aids (literally), a M3 with an exhaust sounds horrible. Kind of a reminds me of a stock turbo R32-34 with a loud exhaust, just sounds dreadful.

The F80 even stock sounds awful even compared to an RB26. I don’t know how but BMW figured out the ideal exhaust setup to make that engine sound as terrible as possible. 

  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...