Jump to content
SAU Community

Recommended Posts

Hi guys next time this is updated by a mod the c34 and 260rs section needs to be corrected. 260rsstagea , numleg , gtr260 , and big boy dan are all rs260s and need to be moved to the autech 260 list. I would love to post up some new power figs but im still waiting on my wiring harrness conversion to be finished arrrgh

Hi guys next time this is updated by a mod the c34 and 260rs section needs to be corrected. 260rsstagea , numleg , gtr260 , and big boy dan are all rs260s and need to be moved to the autech 260 list. I would love to post up some new power figs but im still waiting on my wiring harrness conversion to be finished arrrgh

Nice observation!

Hi guys next time this is updated by a mod the c34 and 260rs section needs to be corrected. 260rsstagea , numleg , gtr260 , and big boy dan are all rs260s and need to be moved to the autech 260 list. I would love to post up some new power figs but im still waiting on my wiring harrness conversion to be finished arrrgh

Might have got mixed up in the refresh. I'll go through it all tonight, and put an update together for the mods.

Thanks.

Well, I fired off a updated one to Goldzilla the mod, who hopefully will update.

Please once you see the updated one, if you believe you have a spot in there or I have missed you out, please post up. Its the only way I can keep it updated. Especially if you have C34 powers above whats listed, or Drag times would be great.

If you don't make it into the Top 5 for the section, feel free to post up results here, but the list will obviously not be updated.

Cheers.

sounds like you need a modified torque converter and it will go very low 13's pretty easily

cheers

darren

Yeh that's the next mod on the list :)

That run was a 2.311 60' time so should be a big improvement when I get it

  • 3 weeks later...

To much too long too complicated. Kiss principle.

Plus, those who know people will know the mods, or can pm if they need to.

Just thought Scotty, you have a PI time don't you?

What about Ironpaw's dual fuel setup, e85 and gas? Perhaps all the other mods should be listed too?

Mark that down. Other mods aren't really required, but the fuel gives you an idea. What % extra does E85 give you over normal, non cheater fuel?

Just thought Scotty, you have a PI time don't you?

No mate, not yet. I missed out on this weekend's run as I wasn't sure the engine would be back in. As it is it needs a damn good tune, opening up the runners made a huge difference, its now running 19/20:1 on cruise. :unsure:

Yay i finally found something i can b on a leader board for! I've done a 1:06.5 round the queensland raceway sprint track (just to be clear its not the full length national track the V8 supercars use.) only mods to my c34 were coilovers, FMIC, turbo back 3inch and gtt brakes. Hopefully now that ive made some handling adjustments i can improve on this dreadfully slow time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...