Jump to content
SAU Community

Recommended Posts

Where to get genuine Nismo ones?

I have the same setup as Terry on my Nismo LMG3's except I run the longer Nismo lug nuts. I got mine through Nissan Race Shop in the US because at the time the Australian dollar was really strong and they had them on sale so it worked out cheaper then anywhere I could find in the Japan but as you know the dollar is weaker these days (still half decent) so it might pay to check RHDjapan or Nengun first. Currently on the Nissan Race Shop website the Nismo long lug nuts go for around $150USD and the shorter ones $145USD with the valve stem caps being $35USD. Hope that helps

[edit]In regards to the Nismo lug nuts I also did see somewhere not to use a rattle gun on them. I refuse to and whenever I take my car to a shop where the tires have to come off I inform them as well and so far they have been good and not used a rattle gun on them.

Edited by Triptych
  • 4 years later...

Bump for this thread. Ive had cheap wheel nuts for quite a few days but now they are not holding up to track days.

What would ppl recommend for track days ? I want strength and reliable

thanks

On ‎1‎/‎03‎/‎2013 at 6:15 AM, JimmyRickard said:

What's the best option for a track only car? Can the genuine Rays nuts strip when using a rattle gun as well?

Best option is to not use aluminium nuts or a rattle gun without a torque bar.

http://www.kctools.com.au/Products/impact-sockets/1-2-drive-torsion-bars/1-2-quot-drive-torsion-bar-2

You can find steel nuts, my recommendation is avoid the open ended ones.  Water will pool in them followed by lovely orange streaks of rust.  I got some ARK design ones ages ago.  They are longer (50mm) to suit the longer Nismo studs.  Cant remember from where maybe ebay maybe direct.

http://www.arkdesign.co.jp/accessory.htm

6 minutes ago, vxsr33 said:


These are good, only problem is that the paint flakes off extremely easily on them.

I have no experience with them, just saw them whilst i was browsing one day

i dont use alloy/alu nuts because ive had multiple sets destroyed... when I learned my lesson and they were still getting damaged it was the different workshops who worked on the cars. Both my cars run Nismo steel nuts, havent had any problems with them. Bit of copper grease and theyve been good for years.

As far as coloured ones, im not sure, sorry.

  • Like 1
  • 4 weeks later...

326 Power lugs are super sweet.

Aluminum though so can be stripped if your not careful.

caps are interchangeable and come different styles and even spikes if your into that kinda thing.

326px_009_3.jpg

b93-003_3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...