Jump to content
SAU Community

Recommended Posts

  • 1 month later...
On 28/07/2016 at 11:19 AM, hrd-hr30 said:

Seems to be the Hankook Soft that goes off quickly with heat cycles. The Z214 Medium cycles very well, if Nev's experience with them over a couple of years is anything to go by.

FWIW, Nankangs ran 60.2 at Lakeside yesterday. That's 1.1sec faster than NT01 and less than 4 tenths slower than the Hankook Soft PB. Not bad for cheap rubbish in a medium compound vs probably the fastest semi available. Hell, they make NT01s look expensive! 

Not alot of options for anything wider than a 255 in 17" wheels

Was considering some Nitto 275 NT01 all around, but the Nankang AR1 255 all around might be a better option harry? Can anyone recommend a seller for the Nankang AR1 in Brisbane? or interstate even?

  • 1 month later...

Has anyone tried Achilles tyres? I have run a set of 123s and the newer atr K sport on my 33. The k sports seemed to hold up better than the 123s which were super sticky but just fell apart after a few track days. I've done 5 track days and a few thousand k's on the ksports which are now worn out. Overall I'm fairly happy with them for the price, I think they were about $1100 a set; 245 40 18 and 265 35 18 on the rear. 
Just wondering how they compare to the Nankang Ar1s and Nitto NT01?
I'm particularly interested how they hold up on a heavier car as I will be getting a 33 GTR soon.

I tried the 123s as well, only lasted 2 track days and maybe 2000km, would not buy again. Have also run ad08r, 2 track days, 15k street km and still going well above 65% tread. I now have a set of track wheels with Nankang ar1, 3 track days done and look to easily have at least another 5 days in them. They grip well from cold, last well and where cheap at $205 fitted for 265/35/18. Would be an interesting comparison with the achilles semi.

 

I wouldn't use the AR1 as a street tyre though.

 

 

Hankook Z221 in medium will last me over a year thrashing and still perform even when worn! The last set i ran from late 2016 to the end of 2017 which i worked out was probably 300-400 laps... Same tyres still did a 1.39 at EC and then blew a front the next session lol....

A mate is importing container loads of the ZESTINO tyres and getting good reviews, ill be testing their competition Semi Slick in April at this stage which is between a slick and semi... They also do the street semis which are cheap and apparently comparable to the Z222 from Hankook... Main thing is,. they are CHEAP!

I think his page is K Racing on Facebook but if anyone wants more info just PM me and ill get you in contact!

  • 1 month later...

AR1 update from me. 

I am progressively going faster and resetting my PB as the weather cools off, seems it was a bit unfair to buy the AR1 in summer and expect 2 secs straight up vs the old ones in cooler weather.  

They do wear faster than the RS-R I had and are very sensitive to pressures/heat soak. Seemingly preferring high pressures but at the same time needing to be cooled after a few hot laps with the higher pressures and camber. 

I've done 3 track days, only a few hundred k's and already they are on the tread indicators - but those first 2 days were in 35deg heat and one of those days i had busted rear sway bar end links and slide all over the place, torching the tyres in the process and still managed a small PB. 

I will either move to better semis next or look at what options I have in slicks for next season to coincide with an engine swap/power upgrade. 

 

  • 2 weeks later...

Where to after AR1s? Better semis or slicks? 

I was thinking full slicks to handle the extra grunt from an engine swap end of this year, but my problem is space. 

I don't like the big 45-50mm flares so I only fitted 25-30mm and that looks perfect with a 9" rim 255 tyre and -3.5 front camber (don't have heaps of shock clearance left). 

To go wider would mean more "poke" so what would be the next step in better semis, and if slicks, I don't fully get slick sizing so help would be great :)

better quality semi's ? Hankook's the next step up in quality and price.

my experience with AR1's to new set of 050's is circa 1 - 1.5 sec difference over a 61 - 62 sec lap

never been involved in full slicks before but would think unless go full soft option getting heat into them to take full advantage would be a problem then at the proper soft level they would last long  at all !??

Edited by bcozican

Guys in the club using mediums without issue, though they can struggle in a top 10 shoot out (1x warm up, 1x hot lap only)

but they are getting them second hand for $200 a set as they all run 18x10 on skylines or with heaps of guard work in anything else.  

  • 1 year later...

Its time for a new set of tyres so i guess i'll try the AR1s. Ebay can deliver 265/35/18s for around $300each, but is there a shop in Sydney that will supply them for something close to that?

15 hours ago, MrStabby said:

Its time for a new set of tyres so i guess i'll try the AR1s. Ebay can deliver 265/35/18s for around $300each, but is there a shop in Sydney that will supply them for something close to that?

Blair's Tyre Service Cabramatta, I have had 2x 255/40/18 fitted for under $500 (will need to dig up receipt) last year... hence, "have had".. not sure if Coronavirus has inflated the prices yet lol

  • Like 2

I've had a set of these on for the last 6 months or so - http://sailuntyre.eu/plt/R01-SPORT.html

Did the Adelaide Rally with them, and weekend driving etc. Pretty impressed, have a few track days coming up and will update

Cost effective at around $130 fitted for 235/40/18

3 hours ago, Chris32 said:

I've had a set of these on for the last 6 months or so - http://sailuntyre.eu/plt/R01-SPORT.html

Did the Adelaide Rally with them, and weekend driving etc. Pretty impressed, have a few track days coming up and will update

Cost effective at around $130 fitted for 235/40/18

Tread pattern almost looks like Ad08r

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...