Jump to content
SAU Community

Recommended Posts

Nah Marko. The 5's and all the pipe work will go on a shelf in the garage all wrapped up. The condition is that this precision must beat the -5's in all areas!

Jez matched the -7's with a 6262, you'd think I can match -5'a with the next size up.

Also, spoken to Yavuz about engineering it AND passing emissions. That was another 'condition'. Both he said would be no problem.

the turbo size doesnt matter much for emissions testing, bigger is better in that regard as it doesnt come on boost during the test.

cams are another matter, you dont want big cams when going for an emissions test. good cat and some E85 will make passing pretty easy.

mine passed with the 3L and 35R on a euro3 cat.

Oh i know, but when a little SR is beating your -5 graph both down low and up high with one of these things, not to mention Jez's result it's really saying something.

If it's a huge flop then nothing is stopping from bolting the little baby -5's back on.

The overlay graphs from the other day seem to suggest there is not as much in it as everyone is saying, at least @ 20psi - and given you will run more with both...

Big call you are making here.

Lucky you still live with ya mum.

I reckon the -5s will fall over at 25-26psi and the PBT will b good for 30+!!!

f*k -5s....

Just because you can't fix your 40rwkw hole :thumbsup:

Plus for a car that gets street/daily driven running that type of boost is just asking for problems IMO. So much stress and pressure on the entire system... Not to mention if you do track days as the heat would also be a factor to consider. Hence all these Time Attack cars you see running 30psi+ are generally one-lap wonders before the heat sets in. You won't see them doing 5-10 hot laps :)

Just because you can't fix your 40rwkw hole :thumbsup:

I no, i mite one day come to like them if I can sort what ever is wrong with the dam things.

Anyone got any sudjustions ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...