Jump to content
SAU Community

Recommended Posts

2 hours ago, r32-25t said:

On the knock out rounds you do but not during the free runs 

I've seen it at the finals at Eastern Creek.

As for penalties, it depends on who you are from my experience.

I know there's likely more skill in drag racing, getting a car to leave well etc, but I do wish there was some roll racing closer to me. It seems like a great way to blow off some steam with your mates, hear angry spooly boi noises, trap some fun km/h and hopefully not be as rough on the car as hard launches are. 

 

 

  • 2 months later...

Another great night at Roll Racing

Made light work of a 5.0L V8...

As you can see, my oil pressure gauge is rising nicely as I power through each gear. Stock bottom end , stock gearbox , and still going strong !!!!!! 80° oil temp ALL night baby, this is a turn key package.

watch me gain about 10 car lengths on this piece of Detroit muscle

 

 

  • Haha 1
36 minutes ago, Ben C34 said:

Wow you actually did it! You f**king beat a v8 wow man high five.

 

Wow again, thanks for sharing the incredible moment. How hot was the turbine housing?

Shit yes, wasn't hard pal. Despite your obvious sarcasm, factually your response is bang on!!!

When you gonna race my Kamikaze S15? Wouldn't mind seeing you throw your toys when I dust ya!

 

3 hours ago, BakemonoRicer said:

Shit yes, wasn't hard pal. Despite your obvious sarcasm, factually your response is bang on!!!

When you gonna race my Kamikaze S15? Wouldn't mind seeing you throw your toys when I dust ya!

 

Come to Adelaide bro, then we can hug it out.

  • Haha 3
10 hours ago, WantGTR said:

this thing run a number yet?

Not yet...but from a 40kmh roll on a 250m course, I'm trapping over 205kmh at the finish line.

That's serious business for a 2.0L with a torque limited tune!!! The top end is just limitless really - the head is just begging for more boost. It's making the power so easy and I'm f**king slingshotting in 4th gear on other cars.

Even with a stock bottom end its a 300kmh speed rocket.

1 hour ago, BakemonoRicer said:

Not yet...but from a 40kmh roll on a 250m course, I'm trapping over 205kmh at the finish line.

That's serious business for a 2.0L with a torque limited tune!!! The top end is just limitless really - the head is just begging for more boost. It's making the power so easy and I'm f**king slingshotting in 4th gear on other cars.

Even with a stock bottom end its a 300kmh speed rocket.

Is it running boost by gear?

1 hour ago, BakemonoRicer said:

Not yet...but from a 40kmh roll on a 250m course, I'm trapping over 205kmh at the finish line.

That's serious business for a 2.0L with a torque limited tune!!! The top end is just limitless really - the head is just begging for more boost. It's making the power so easy and I'm f**king slingshotting in 4th gear on other cars.

Even with a stock bottom end its a 300kmh speed rocket.

I think I need to dust off my hoon jacket.

  • 2 months later...

I've been spending a little time making some small improvements to the S15. I had the wiring for the speed controller modified with 4 Pin Deutsche plugs to handle some extra current, and fabricated 2 Brackets and mounted it adjacent the surge tank. After that, spent a little time detailing the original paint back to glass finish and finished it with Dodo Carnuba Wax.

Emptied the oil catch can which presented around 15ml worth of oil after 5,000kms of driving, thus meaning there is next to no blowby. Should have the car out at Roll Racing next month, although damn, the itch to get a Samsonas sequential is wearing me down LOL

MR2wquW.jpg

F1Rvq73.jpg

n9zQvjD.jpg

kCUBhzu.jpg

ldMPZwa.jpg

 

 

 

 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...