Jump to content
SAU Community

Recommended Posts

Nitto rods just for a GT3076?

Sorry to :laugh: but that's just ridiculous wasting of money when many people are making 650hp on GTR rods day in, day out.

Given you and your "engine builder" already reckon you'll make more than 400hp, that would mean you've already already chosen a turbo?

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

nitto rods aren't much dearer. $650 for nitto h beams from hi octane. $620 for spool h beams. Do the standard 26 rods need prepping at all?

Resizing if using arp bolts? How much would this cost to be done, plus the cost to buy the 26 rods? Could work out around the same in the end.

^^^^

Thanks mate

Don't see what the big Whoha is about buying a set of nitto rods, do it right the first time isn't it? The guy above is right my nitto rods cost me $630 I'm not going on a budget build to have shit break or fail.... 400+hp is just a rough figure... I'm not in it to make a huge amount of power, if the power gets up there then that's a bonus, I don't want too much lag...

R31nismoid I asked a question on what turbo to get for what I want not for what rods I'm using, as been said 400+hp is just a figure was I will be aiming for the max hp I can get with my setup, I don't mind spending $630 on nitto rods if they are hell alot stronger then a set of used rb26 rods and in conjunksion with that I thank everyone for there input with running the rb26 yeah it would of been a "cheaper" option but you pay for what you get I guess

The turbo that was going to go on it was a gt3540,

I just wanted to see what others input was on what turbo to run

GT3540 is 4500rpm on a well sorted motor.

GT3076 all day for your power goal. Awesome things they are!

"Fullboost" ARGH. Is that 5 psi or 55psi??????

Lol, good call.

I consider full boost on my car as the limit which the turbo will not create boost past because of the spring tension I have chosen to put in my waste gate.

Go the GT3076 - 3540 is too big for the RB25 - pretty sure it won't low mount whereas 3076 will fit with 10mm spacer. GT3076 is good for 300kw on 98 330kw on E85 and much more responsive on a 25 than the 3540. In fact people have had realy good results with the 3076 on an RB30/25.

^^^^

Thanks mate

Don't see what the big Whoha is about buying a set of nitto rods, do it right the first time isn't it? The guy above is right my nitto rods cost me $630 I'm not going on a budget build to have shit break or fail.... 400+hp is just a rough figure... I'm not in it to make a huge amount of power, if the power gets up there then that's a bonus, I don't want too much lag...

R31nismoid I asked a question on what turbo to get for what I want not for what rods I'm using, as been said 400+hp is just a figure was I will be aiming for the max hp I can get with my setup, I don't mind spending $630 on nitto rods if they are hell alot stronger then a set of used rb26 rods and in conjunksion with that I thank everyone for there input with running the rb26 yeah it would of been a "cheaper" option but you pay for what you get I guess

Woudn't have matter what you chose....I would like to see you break a spool rod with any of the turbos mentioned,

lol, theres vl turbos running very low 8's with them...

cheers

darren

Go the GT3076 - 3540 is too big for the RB25 - pretty sure it won't low mount whereas 3076 will fit with 10mm spacer. GT3076 is good for 300kw on 98 330kw on E85 and much more responsive on a 25 than the 3540. In fact people have had realy good results with the 3076 on an RB30/25.

Yes the 3540 will low mount..lol, they fit on stageas ffs..and they are the worst of the Nissan bunch to try fit turbos on stock manis'..., plus none of stao hypergears would fit stock manifold otherwise seeing as G3 etc is same size and comp cover as 3540 ....

cheers

darren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...