Jump to content
SAU Community

Recommended Posts

Hi Guys

Just a quick note to let you know that Tein coilovers are now available at Capital Steering Fyshwick 62805243.

The new importer of Tein is Fulcrum Suspension & they are revalving & respringing them to suit Australian conditions. They are bringing in the Super Street coilover which are ride height adjustable & have 16 damper settings. They are also have available to EDFC in car shock adjuster.

Big thumbs up to Johnny at Trojan. Usually go to Integra but it's just too far away from me and hard to organise a lift from.

Got my car serviced today and got everything I wanted looked at and fixed where appropriate for a very very reasonable price and very quickly too. Also got some good advice and some niggling things sorted.

  • 4 weeks later...

I have nothing but praise for Ben at Intune, currently based out of the Evo Motorsport workshop in Fyshwick. I have been to him about 4 times in the last month and he has been extremely helpful and does such a great job.

Firstly I got a service done by him, changing all oils, all filters, plugs, plus an overall check my car for an awesome price. He mentioned that the coilpacks may need to be changed in the near future, as they were tracking and misfiring when hot.

A couple of days later Ben serviced my master cylinder, again for a very respectable price. That night it started to misfire bad, so I rang Ben and he even organised a tow truck to pick my car up from my house in Gungahlin to tow it to Evo's workshop at no charge. He replaced a few of the worse coils, until I could get new Bosch ones in.

Today I took it to Ben and got six new Bosch coilpacks put in to replace the dodgy RB20 coils. He did an awesome job and I have got a nice little power increase too.

Sorry bout the essay, but am very happy with both his work on my car, but also the advice he happily gives to me whenever I have questions etc.

Nath

Edited by NathR32

yea i also took my car to Ben last week and overall have been happy with his service and also like nath said a very reasonable price. Need to take the car back for one small thing but apart from that top bloke and didnt mind explaining a few things to a tard like me :D

  • 3 weeks later...

Don't bother booking yr 'line in to Integra on 25-26th Nov. Ed will be far too busy doing mine!!!!

Finally going to put all those spares I've been accumulating into the Tokyo taxi. [belts, w/pump, Power f/c, cam wheel].

  • 3 weeks later...

Just had to add another recommendation for the guys at Trojan in Mitchell.... got a major service done yesterday and couldn't be happier! Price quoted didn't change, although belts, wiper blades and globes were done at no charge... really great guys that love thier work! Seriously, don't have second thoughts about taking your 'line to them!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...