Jump to content
SAU Community

Recommended Posts

Took some pics the other day with the phone after a polish, came up pretty well.

Washed, clay bar using a Bowden's Kit, and poslished with a Mother's Wax Attack kit I bought last year, using Mother's Cleaner Wax.

Does any other sealant need to go on over the cleaner wax? It says that its the only step required, and it has left a nice layer of wax on it.

Looking to try some differant waxes in the near future, as this was done in a bit of a rush after work one night

post-493-0-93561200-1408589721_thumb.jpg

post-493-0-06459600-1408589769_thumb.jpg

post-493-0-24266900-1408589804_thumb.jpg

  • 2 weeks later...
  • 8 months later...

Did this on Saturday, the pics are MMS'd so a bit crappy in res. The paint was finished with Naviwax, after clay and one pass of polish. Didn't go crazy due to lack of time and just finished as we ran out of daylight

7166.jpg

7165.jpg

7169.jpg

  • Like 3
  • 10 months later...
  • 1 month later...
  • 2 weeks later...

got bored so i got the cleaning gear out again.

she reaalyy needed it but more so cos its starting to rain more and i want to keep it off the paint as much as possible so no heavy cutting but lots of wax.

did a full wash

claybar

basic hand polish

basic hand wax

DSC_0196_zpsvwbaairp.jpg

DSC_0203_zpsfjd5whmw.jpg

DSC_0202_zpsq711kall.jpg

DSC_0201_zps0r9psih4.jpg

everyone loves looking down a shiny bonnet :P

DSC_0198_zpslhrciuhs.jpg

and what does it do immediately???? rain

DSC_0205_zpsrmvnfqs1.jpg

  • Like 1
  • 1 month later...
  • 9 months later...

Did mine a couple of weeks ago. Steps were as follows . 

Used Bowdens Own wheely clean.

Washed with bowdens nano wash using two bucket method.

Claybar using mild nano wash solution for lubrication.

Bowdens paint cleanse and restore

Meguiars tech wax 2.0 applied with DA polisher

Waited 4 hours then used Bowdens fully slick .

Plus tyre shine . Pretty happy with the results

20170326_145228.jpg

20170326_145234.jpg

Edited by havoc_r33gtst
Added another image
  • Like 3
  • 2 months later...
  • 4 weeks later...
  • 3 months later...

Finally got around to removing the nasty yellow haze of the daily 35's headlights. No befores (just imagine all 35's that live outside 24/7) but fairly simple process:

1. Wet sand with 1500 grit paper

2. Polished with Meguiars Ultimate Compound and medium cut pad

3. Sealed with a Dupli-Color UV Resistant Clear Coat, otherwise they will just go back to being yellow in a few weeks

IQhzjr3.jpg

UT5rTd9.jpg

  • 6 months later...
  • 1 year later...
1 hour ago, Dandee said:

robert downey jr ok GIF
Had the guys from schmicko do it at my house, really nice end result. A bit pricey, but definitely cheaper than the in store detailing centres. If only I took a before photo! Oh and they also applied ceramic coating yeaaaaah!

detailing.JPG

Cost?

  • 1 month later...

It was $790, which is actually a good price now that I think about it, especially when dealerships charge $1-$2k for something like this and they use half-ass products. Oh and I paid about $300 for the exterior detail prior to this, so paint correction, machine buffed, clay barred and all that. Doesn't look as good here because of my poor quality camera, looks so much better in real life, not sure where else they do, but i think the ycover mainly most of Sydney, can go here mobile car detailing . I did think about doing this myself or asking a mate/car enthusiast, but just wanted the extra peace of mind; but hey no complaints haha

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...