Jump to content
SAU Community

Recommended Posts

10 hours ago, YEE-HAA said:

Looking at the V36 for my next car, The digital radio was mentioned briefly.  Would it work here or would you have to change the radio to an Australian version to pick up Australian radio?

Japanese use a narrower band so you need a FM band expander. there cheap. Just need the know how to put in yourself or pay someone.

And yes the AM works fine.   

15 hours ago, YEE-HAA said:

Looking at the V36 for my next car, The digital radio was mentioned briefly.  Would it work here or would you have to change the radio to an Australian version to pick up Australian radio?

If you're talking about digital radio as in the broadcast service itself, for higher fidelity audio, then no. We use DAB+ here in Australia, while Japan uses a couple of technologies but predominantly ISDB-TSB. The two are not compatible with each other.

Otherwise, whatever else V35_Paul already mentioned.

14 hours ago, V35_Paul said:

Japanese use a narrower band so you need a FM band expander. there cheap. Just need the know how to put in yourself or pay someone.

And yes the AM works fine.   

Yes Im familiar with the band expander having fitted one myself into my PM35. Not worried about AM though

8 hours ago, The Max said:

If you're talking about digital radio as in the broadcast service itself, for higher fidelity audio, then no. We use DAB+ here in Australia, while Japan uses a couple of technologies but predominantly ISDB-TSB. The two are not compatible with each other.

Otherwise, whatever else V35_Paul already mentioned.

Yes I was more worried about picking up FM radio.  I like to mix it up with FM radio or MP3, which I have now, playing through a TV tuner with usb input.

So what do people do if they have the ISDB-TSB radio? Pull it out & put in an aftermarket deck?  I know I didnt really have that option with my PM35.

Not cheaply anyway.

 

Edited by YEE-HAA
6 minutes ago, YEE-HAA said:

So what do people do if they have the ISDB-TSB radio? Pull it out & put in an aftermarket deck?  I know I didnt really have that option with my PM35.

While I stand to be corrected, I would say no chance of going aftermarket. In my 2009 vehicle, I tried a little experiment and started the car without the headunit powered up. It took out the display in the centre of the instrument cluster and my A/C control, which is what I anticipated from what I determined looking up the pinouts in the workshop manual.

Radio sucks anyway. Be your own DJ.

It does, with Aux RCA inputs in the centre console (under the armrest). So I plug in a Sony NW-ZX1 media player. No control from the car's interface but that's just a minor inconvenience to me.

I've then taken the front speaker outputs of the deck to feed an Arc Audo PS8 DSP, which then produces four channels for the Arc Audio XDI600.4 amp to feed the front and rear speakers and one more channel for the old faithful Sony XM-1002HX amp to feed the subwoofer. Audio problem solved. It could be better but it's as good as it gets with an OEM headunit that can't come out willingly.

10 hours ago, The Max said:

It does, with Aux RCA inputs in the centre console (under the armrest). So I plug in a Sony NW-ZX1 media player. No control from the car's interface but that's just a minor inconvenience to me.

I've then taken the front speaker outputs of the deck to feed an Arc Audo PS8 DSP, which then produces four channels for the Arc Audio XDI600.4 amp to feed the front and rear speakers and one more channel for the old faithful Sony XM-1002HX amp to feed the subwoofer. Audio problem solved. It could be better but it's as good as it gets with an OEM headunit that can't come out willingly.

Have you used Audison or Hertz DSP before? If so, how do they compare to Arc PS8?

I haven't used either one but on paper, at the time, the Arc Audio PS8 was the clear winner and with the promise of an in-vehicle control panel, it was similar to what I had with my old Maxima and the Sony MDX-C8900 minidisc deck which controlled the XDP-210EQ DSP via its very tactile remote control.

However, the disappointment set in with the level of support from them. Yes, if there were installation issues, they were quick to assist and that was fine. But the controller, the next most important thing on the list after sound quality and installation footprint, took THREE F#@KING YEARS to be released. After it was finally released in December last year, I was first in line to purchase one but then the dude I bought the PS8 from to begin with had mentioned that his distributor no longer brings in the Arc Audio products because they have been very unreliable with him. If I knew that, I wouldn't have ended up importing my XDI600.4 amp back when I was told he was no longer supplying Arc audio products. Likewise, I had to buy the controller via an eBay seller. Sure, I paid more than I should've but that's how it goes sometimes.

Now, mind you, I'm extremely happy with both products. Perhaps good things do come to those who wait but they have proven to me that they take way too long to fulfil their promises, if at all. Their software does have its share of glitches, which makes it painful to work with at times but once you've got it nailed, it works very well and remains so.

However, having said all that, if I were to start all over again, I'd give them a miss and go straight to Hertz's H8 DSP. While the hardware isn't all that different to the Arc Audio PS8 (on paper, that is), they seem to have gained popularity over Arc for their support and that makes their distributors seemingly happy. Don't take my word for it though. Look around, talk to dealers and check out the general consensus on other forums. I'm just giving my observations since I have no experience with them otherwise.

Audison didn't seem to have neither the same small footprint nor the gamut of features and options like the others at the time. Can't say they seem any better to me now. I've never been that trusting of anything that comes from an Italian electronics manufacturer. That comes from professional experience with other Italian electronics. I can't speak for Audison from experience. ;)

On 4/27/2017 at 1:59 AM, YEE-HAA said:

Looking at the V36 for my next car, The digital radio was mentioned briefly.  Would it work here or would you have to change the radio to an Australian version to pick up Australian radio?

this is exactly for You :D

 

On 4/28/2017 at 9:54 AM, The Max said:

I haven't used either one but on paper, at the time, the Arc Audio PS8 was the clear winner and with the promise of an in-vehicle control panel, it was similar to what I had with my old Maxima and the Sony MDX-C8900 minidisc deck which controlled the XDP-210EQ DSP via its very tactile remote control.

However, the disappointment set in with the level of support from them. Yes, if there were installation issues, they were quick to assist and that was fine. But the controller, the next most important thing on the list after sound quality and installation footprint, took THREE F#@KING YEARS to be released. After it was finally released in December last year, I was first in line to purchase one but then the dude I bought the PS8 from to begin with had mentioned that his distributor no longer brings in the Arc Audio products because they have been very unreliable with him. If I knew that, I wouldn't have ended up importing my XDI600.4 amp back when I was told he was no longer supplying Arc audio products. Likewise, I had to buy the controller via an eBay seller. Sure, I paid more than I should've but that's how it goes sometimes.

Now, mind you, I'm extremely happy with both products. Perhaps good things do come to those who wait but they have proven to me that they take way too long to fulfil their promises, if at all. Their software does have its share of glitches, which makes it painful to work with at times but once you've got it nailed, it works very well and remains so.

However, having said all that, if I were to start all over again, I'd give them a miss and go straight to Hertz's H8 DSP. While the hardware isn't all that different to the Arc Audio PS8 (on paper, that is), they seem to have gained popularity over Arc for their support and that makes their distributors seemingly happy. Don't take my word for it though. Look around, talk to dealers and check out the general consensus on other forums. I'm just giving my observations since I have no experience with them otherwise.

Audison didn't seem to have neither the same small footprint nor the gamut of features and options like the others at the time. Can't say they seem any better to me now. I've never been that trusting of anything that comes from an Italian electronics manufacturer. That comes from professional experience with other Italian electronics. I can't speak for Audison from experience. ;)

The Hertz and Audison are exactly the same. Same factory, same internals. I have the bit ten at the moment, really good imo. Was reading about the PS8 before I went with Bit Ten, was liking it but went with Audison at the end due to the support I could get here locally. I guess in some ways I'm glad I went with the Bit Ten, would have been super pissed with the controller.

23 hours ago, jp2en said:

 

it does looks like :-D

 

Keeping your cards close to your chest....

I was looking at buying a 370GT in Adelaide, and Sinergy Motorsport showed me one with the Nav & menus converted to English - probably done by the same people that jp2en is representing. I believe they are European based, Russian rings a bell (but I may be getting confused with the 350GT conversion). Cost quoted on a car bought from Sinergy was around $900 - $1000, but (if I remember correctly) it had to be a 2010 or 2011 model or later. Earlier 370GTs couldn't be converted. I don't know how much they charge for a car not bought from them.

14 hours ago, GeeDog said:

Keeping your cards close to your chest....

I was looking at buying a 370GT in Adelaide, and Sinergy Motorsport showed me one with the Nav & menus converted to English - probably done by the same people that jp2en is representing. I believe they are European based, Russian rings a bell (but I may be getting confused with the 350GT conversion). Cost quoted on a car bought from Sinergy was around $900 - $1000, but (if I remember correctly) it had to be a 2010 or 2011 model or later. Earlier 370GTs couldn't be converted. I don't know how much they charge for a car not bought from them.

Charged me a bit more.

  • 1 month later...

Hello fellow SAU enthusiasts and members. Some how thanks to all the threads I've been able to pair Bluetooth with my phone. But while listening to music on my Nexus 6p,the Bluetooth keeps dropping. However, while on phone, it never drops out. Is anyone facing this issue? How do I get connection consistent?

I don't really think there is a way. I've only ever used my phone purely for the handsfree connection and it does occasionally drop out but only for about ten seconds. Never happens during a call though, so it could well be that it's a power-saving feature in Android that kicks in and then the handsfree kit wakes it up again.

You would think that while streaming music from your phone to the vehicle, the phone would stay awake at all times but I suppose something odd might be at play there.

One thing you could try is preventing the phone from falling asleep on you by going into your phone's Settings -> Developer Options -> Stay Awake (enabled) and plugging it into a USB charger. That way, the phone will never sleep while it's charging and therefore, not put anything else to sleep, such as your Bluetooth connection.

It's only a theory but doing this will either prove or disprove it.

  • Like 1

Yeh for me voice calls through bluetooth are reliable and consistent. I have never had a drop out from the handsfree.

 

I have never tried bluetooth for the music however so I can't comment on that. I use a wireless display device plugged into the video/audio inputs to get things on the v36 screen and speakers. This has proved very reliable for both video and audio with no dropouts. Problem with this however is the power drain on the phone during wireless screen casting of sat google maps, although for the music/audio still streams when the phones screen is off so it doesn't drain as badly then.

  • Like 1
I don't really think there is a way. I've only ever used my phone purely for the handsfree connection and it does occasionally drop out but only for about ten seconds. Never happens during a call though, so it could well be that it's a power-saving feature in Android that kicks in and then the handsfree kit wakes it up again.
You would think that while streaming music from your phone to the vehicle, the phone would stay awake at all times but I suppose something odd might be at play there.
One thing you could try is preventing the phone from falling asleep on you by going into your phone's Settings -> Developer Options -> Stay Awake (enabled) and plugging it into a USB charger. That way, the phone will never sleep while it's charging and therefore, not put anything else to sleep, such as your Bluetooth connection.
It's only a theory but doing this will either prove or disprove it.

Thanks, will give it a shot and see how I go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...