Jump to content
SAU Community

Recommended Posts

6 hours ago, acesofspades31 said:


Hey Pete_Repeat,
I finally got the mirabox installed. However, I am faced with the following challenges :

1. I can mirror screen and screen only... For some reason, my audio isn't mirroring... I think that's because of some sort of limitations of my mirabox may be? Not too sure. My box has WiFi mirroring. May be there's no audio via WiFi? Did you come across something of this sort?

2. Parking brake mod emoji20.png. I've looked through the entire thread and I found its just grounding a cable. But will definitely look extensively on it. Any tips on this?

I think all screen mirroring uses wifi, and mine has no problems at all. As in never drops out or anything. Do you have a 5.1 digital or 2 channel switch on the box? Maybe it's not outputting from the rca audio plugs? 

 

My Audio streams fine with the screen of the phone turnes off as well (so less battery and drain on the phone with just audio streaming). You will still want a charger though I believe. The screen mirroring I use a lot for navigation. I bought a great little media Bluetooth controller as well.

The grounding is simple yes.. But I think a small amount of dash removal is needed. From what I read it's not too invasive.

 

Also, I used a ground isolation/filter for the picture and it cleared the image up from any sign of fuzzy. 

I know the list is expanding, but I could find the exact thing I bought if you want. I bought it from jaycar. Pretty sure it was for the video ground (rather than the power of the box) buy can't remember as it all hides away.

30 minutes ago, Pete_Repeat said:

The grounding is simple yes.. But I think a small amount of dash removal is needed. From what I read it's not too invasive.

 

I'd love to know how to do this... I had done a little research a while ago and thought it was a complex process with a defeat device needing to be fitted (for a 2009 J50 at least)

Cheers - N

34 minutes ago, talkiet said:

I'd love to know how to do this... I had done a little research a while ago and thought it was a complex process with a defeat device needing to be fitted (for a 2009 J50 at least)

Cheers - N

I haven't done it as mine was already done, but I believe it is setup to the handbrake sensor that grounds a certain cable/wire on the head unit. So if that is permanently grounded then video keeps working. 

I do stress I haven't done this myself as it was already on be on my car, but I did do some research before I bought the car and think I read something like that (and t is also quite typical for aftermarket head units to also do this)

 

Edit: as talkiet mentioned, it may also include a module for the speed sensing as well hmm. I suggest looking at g37 google searches rather than limiting to v36 as it returns more info and think they are similar enough to share most  info.. 

Edited by Pete_Repeat
  • 1 month later...

I see on AliExpress there are a couple of vendors offering an Android 7 inch navi unit which they describe as "Android 6.0 Car PC Tablet 2din Universal For Nissan GPS Navi Radio Stereo Audio Player (No DVD)" and other similar descriptions.

The few I have looked at appear to have the same inputs and outputs as the unit in my 370GT, has anybody tried a full replacement with something like this?

Is this a viable option for getting usable GPS with NZ maps?

I'm not totally dissatisfied with what I have, google translate lets me go thru the settings and get USB music and blutooth phone working, and I haven't needed GPS to find my way around NZ before, but I am just wondering if a fully usable Android interface is only a few hundred dollars away.

 

  • Like 1

V35 this would fit, with the usual Metra surround and replacement HVAC controls, but in the V36 it is a lot harder.

There is a Metra kit for the G37, however I believe it is G37 specific, so does not work with V36, and is also for non nav G37, and non-nav is pretty rare for V36s...

This kit...

If it was straightforward, I reckon I would have done it about 3 years ago.. But then again, I have a Bose and so bet it is even harder.... :3_grin:

Edited by nickcorr
Added URL to Metra Kit

So electronically it should be ok, but mounting and fitting it in may be a problem?

My layout is a little different than the Infinity G37,  I'm hoping I can fit in a 7 inch touch screen in place of the existing one, keeping the disk player etc.

Not sure about the nav buttons below the screen.  Some of the Android units I have looked at have a mapping feature for steering wheel controls, so maybe other buttons can be re-purposed too.

 

 

 

DBA-CKV36_dash.jpg

26 minutes ago, LesF said:

So electronically it should be ok, but mounting and fitting it in may be a problem?

My layout is a little different than the Infinity G37,  I'm hoping I can fit in a 7 inch touch screen in place of the existing one, keeping the disk player etc.

Not sure about the nav buttons below the screen.  Some of the Android units I have looked at have a mapping feature for steering wheel controls, so maybe other buttons can be re-purposed too.

Actually, it's electronically where you're going to run into the majority of problems. If you're hoping to continue using all the other features you're currently enjoying on your display, such as the camera(s), maintenance screens, Bluetooth (phone and audio screens), then the integration of the Android kit becomes questionable. I have no interest in the device you're referring to, so forgive me for not caring enough to do the research myself but just be aware that the only thing you'll be able to take out without affecting your AC and even your instrument cluster, will be the LCD touchscreen currently in there. The headunit sitting directly behind the button panel (double-DIN size) needs to remain intact and in service. If the Android kit can take over all major duties, including the bluetooth phone connectivity, then you may have a reasonable solution on your hands.

All that said, I don't trust Chinese engineering. They're clever at reverse engineering but not so clever at forward engineering. ;)

  • 4 months later...

Hi Chris, of I heard and read right you can fix my stereo and tv in my v35 2008 skyline, if this is correct could you reply or email me [email protected], I realise this isn't for free but would appreciate a quote, got to come down from Bundaberg.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...