Jump to content
SAU Community

Recommended Posts

Hey all

Couple questions

1. Who imports / has track only cars?

2. What makes a car track only? looking at a r32 GTR

3. What are rough prices of them?

Thanks

Why bother importing one? There are enough GTR's sitting around in Aus that are so cheap you can just buy and deregister them. If you want a built up race car - what are you using it for? Sprints, IPRA, tarmac rallies? The best race car is one already built for the purpose you want to use it for.

Not always - it depends on what you want to do with it.

Remember things like Jap cages won't be accepted for most CAMS events that require a log-booked cage so you'll need to get that re-done.

Often your cheapest bet is to find a locally done race car on MY105 as Paul suggested. Initial cost MAY be higher but your final cost will probably be lower. But as a rule race cars are usually cheaper than street cars (at least they are a lot cheaper than building one yourself from a street car).

So if it's just a track day car then an import is fine. But if you ever want to do Targa or something similar you'll be struggling without spending the extra $$$. And it will be a lot easier to sell down the track if it is a track only car that can be used for more than just club sprints.

2c

  • Like 1

Every "fruited" GTR race only import I've had come through the doors has been a complete and utter shit box. Yes they have all the good parts but they are always tired and worn out.

Electronics are usually butchered with add on things installed upon add on things

Engine parts are usually old and well used if the car is a cheap one

Gearboxes often crunch and fall apart

Cages are really useless.

Brake upgrades often need seals, rotors and pads

Suspension usually worn out and leaking.

As others have said I'd buy a shell locally and build a good fresh car or buy one done already.

Seen and heard of so many cars that sound great on paper but turn out to be nuggets

Here's the link to my for sale thread:

http://www.skylinesaustralia.com/forums/topic/423367-r32-gtr-log-booked-race-shell-with-cage-non-registerable-sydney/

Can work out a good deal if you're serious, have a lot of other parts to help complete it as well.

hey mate thanks for the offer and it does look good.

but id really like to do it myself. Its as much of a hobby / time killer then it is to actually drive it

Seriously there is so much work in a track car build when started from scratch that basing it on someone elses work is a REALLY GOOD IDEA.

Thanks mate,

And why not here. only becasue it seems cheaper and with more fruit importing one

You'l find these fruits are often rotten bud...

I would definitely recomend to just get a shell locally that you can go check out in person if you want to start from scratch..

And time killer is an understatement! Lol more like time serial killer!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...