Jump to content
SAU Community

Recommended Posts

The caltex on main north road in Salisbury is overcharging for e85. It should be around 20 to 25c below 91 unleaded, the last time I checked it was only 5c below. It's a pity as it's on my way to work. Is this the same for all caltex servos?

Reduced range is the only drawback, and jerries can fix that.

United have a great app for finding e85 servos nearby, although it can be slow to be updated.

Scotty you are the E85 man so rather than doing a search can you answer this quickly.

Does the decreased cost of E85 negate the reduced range?

I'm not 100% on the cost of E85 and from what I have read it's about 30% more fuel?

...

Does the decreased cost of E85 negate the reduced range?

...

Have a read of this over at LS1: E85: A Long Term Evaluation.

Based on his data, over about two years, the cost per km of running E85 was pretty much identical to running PULP.

However that was posted in October last year so prices (and how they compare) will have changed again since.

Ive read on here multiple times people saying e85 is cheaper, but you use more lf it so it ends up more expensive. But e85 seems to be about 25-30% cheaper than 98. If you use 25- 30% more fuel, wouldnt you assume itd end up equal? (obviously depending on how you drive.)

*im no mathematician :D

if you drive "sensible" it equals about the same, put your foot in and can almost see the petrol needle drop. on average day to day driving I lost 100kms per tank switching to e85, but pay about $20 less per tank. also made 40kws from the change.

WOW! That answer couldn't be further from truth! E85 will be 1 of the best things you do to your car :) 100 is just 98 with 10% ethanol (I think) will be nowhere near the same power gains or the same driveability 70% or 85% ethanol will offer. If ya not too accelerator happy increased fuel consumption will be minimal with a good tune.. But its hard not using it with the new found powerz lol :)

Dont bother with E85. Too much hassel for the gain. Try united 100. Almost the same power gain without the issues and costly setup of E85.

Just curious, what gains in performance are there from a lightly modified standard turbo car? I have a friend with the following mods who wants e85 but I think the money is better spent elsewhere... Anyway:

Eg rb25 with standard turbo, 12psi, standard motor, pod, fmic, nistune, 3" exh etc?

Making around 190-200rwkw, could he expect the same increases in power as someone with 300rwkw going from 98 to e85?

Been having a read of this thread - is there enough scope in stock RB25 NEO injectors to run e85 with the stock turbo?

Been having a read of this thread - is there enough scope in stock RB25 NEO injectors to run e85 with the stock turbo?

Doubt it... they are pretty small (370cc i think)...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...