Jump to content
SAU Community

Recommended Posts

Forgive the terminology, maybe I will get it later on

Well bs is still alive in the carsales industry and why am I supprised :verymad:

The R34 I am buying that was supposed to be able to be tuned to 700HP to 800HP could not make 400HP. It could not get enough boost to kick the turbo off.I think he said it was only about 12 lb., it was about 200KW :(

Had it on the Dyno today and found out I need a turbo boost controller and new cam once the turbo controller was installed to be able to take the power it was capible of acheiving , Mmmmmmm :verymad::yucky:

Trouble is learning can be an expensive business :pirate: Grrrrrrrrrr!

Link to comment
https://www.sau.com.au/forums/topic/438031-honest-car-salesman/
Share on other sites

What makes you think you can achieve 700+ HP? What Turbo are you running? Is that your engine bay in your avatar? looks like you have a high mount single?

Going from 200KW to 350+ with just a change of boost controller is highly doubtful... Unless you can tell everyone what the specs are of your engine...

Thanks for your input guys, I have paid the deposit and signed the contract, I am not worried about that, the car is worth it to me, I just get sick of being crapped to.

The motor work was done by Croydon Racing Developements and from what I found out about them they know what they are doing.

The car had $42K SPENT ON THE MOTOR , too many things to write and most of it I do not understand but here are some of the mods; GikenT78 Single turbo kit, OS quad Clutch, push /pull kit, Koyorad radiator , custom made catch tank, Z32 air flow meter', ,nitto h beam connecting rods; je/nitto rb 26 forged pistons, nitto rb series high volume oil pump, 9 lt sump conversion, machine work on engine block, engine rebuild- hand file rings ect, bosch fuel pump ; and all of the other bits and peices that needed to be done.

That is not counting stuff that Advan Performance did, I think they know their stuff.

So there was alot of money spent and the work was done by people in the performance business. I feel OK about the car, well I love it :thumbsup:

I do not know very much about getting a R34 up and running and I maybe wrong, but 600HP, I will soon find out?

Some of the parts should give someone an idea of the type of work done on the engine, no thoughts on what was done to the engine can get up to 600hp ?

When the cam and boost control have been fitted and after the final tune mid next I will take a photo of the Dyno readout and post it

A bit late it seems.....

They just added the Boost controller and Dyno done, 338 AWKW ,so nowhere near the sales pitch talk.

Spoke to the bloke at CRD and he said it is a good unit and if I wanted more from it i would need to update the fuel system and a new cam and they could lift the performance, think that will be enough for me for a while and see what I want to do in the future .

So I will pick it up on Saturday and see how it goes on the 330 kls ride home , should be fun :action-smiley-069:

Normally when those figures are thrown around it means that the engine is capable of making that power given all the supporting mods are in place.

You clearly didn't do much research into what you bought, u just saw a big parts list n they told you this n that and you were none the wiser.

Without a complete fuel system including surge tank and external pumps it's never realy gona make over 400kw (540 hp).

Mine maxed out at 401kw

Also a fuel system from croydon is not cheap, I know from experience as they built mine.

So unless your going to spend cash on a fuel system and upgrade to e85 your not going to see over 550hp

Also who builds a forged motor with all that and doesn't even put in a simple boost controller?

Also a Gtr has camshafts (there is 2 of them)

If it didn't have a set of basic aftermarket cams in there all ready then I'd take it that no head work was carried out at all and now even less likely to make 7-800hp

also 800 at the wheel/ dyno hp is a f**king monster. do you want that sort of power, do you understand what that is like to drive and maintain?

if you get a solid reliable 450-500 atw then you have got to be happy.

sorry to say it again but if your not sure on whats what with the parts list then a 7-800hp car might not be the best idea to chase.

do you like driving it? is it a good car? then drive it love it and be happy with a good purchase.

i can say my rb25 is capable of 800hp.......with $200k

Edited by GH05T

also 800 at the wheel/ dyno hp is a f**king monster. do you want that sort of power, do you understand what that is like to drive and maintain?

if you get a solid reliable 450-500 atw then you have got to be happy.

sorry to say it again but if your not sure on whats what with the parts list then a 7-800hp car might not be the best idea to chase.

do you like driving it? is it a good car? then drive it love it and be happy with a good purchase.

i can say my rb25 is capable of 800hp.......with $200k

Ontop of that it would be boring as hell to drive everyday as with that power you are not seeing boost in the rpm you spend most your time in on the road, when I drove a 500kw gtr on the road it really felt boring compared to a 350kw one that is until you go past 5-6k lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...