Jump to content
SAU Community

Recommended Posts

redcorpsjames the event is not just for Skylines, all makes and models are welcome, Our goal is to promote our club and attract new members, with a nice day out where people can sell their unwanted parts and catch-up in our informal car meet.

Yeah cool. I am more interested in the cruises and meet ups. I was also thinking about joining the club, but was just wondering what sort of benefits you get from the associates to the club such as Parra Nissan, hornsby nissan etc?

I have V35 and M35 parts galore which i need to get rid of......

But no matter what the rules or constitution says nothing will change.

Goes in one ear and straight out the other.

Good luck with the R-chassis swap meet, coffee and cars

I have V35 and M35 parts galore which i need to get rid of......

But no matter what the rules or constitution says nothing will change.

Goes in one ear and straight out the other.

Good luck with the R-chassis swap meet, coffee and cars

There is only one person not getting it.

That person is you.

In for sure, should be an awesome day. Might need to sift through the garage and see what I've got laying around.

My mechanic might have some spare parts lying around he might want to sell, i'll hit him up

Ticket bought, lets see how many parts will fit in the R35 to bring down to sell :)

I saw how much you were able to pack in to it for SMSP last year so I'm guessing quite a bit lol

I have V35 and M35 parts galore which i need to get rid of......

But no matter what the rules or constitution says nothing will change.

Goes in one ear and straight out the other.

Good luck with the R-chassis swap meet, coffee and cars

cya fag-got :)

I'm very interested to know what is going to happen when people start to buy the local sold Infinitis and that the "Infiniti Skyline" is actually going to be a thing. In the constitution it is considered that anything with a "Skyline" badge is a skyline, so this could cover Prince, Nissan and Infiniti. But at what point does the V-series crowed just become the Infiniti crowd?

Damn you Nissan for complicating things!

It doesn't matter. Most of the active club members haven't owned a skyline for years. Some have never owned them.

So

Anyone planning on selling me a boost controller cheap?

What's boost?

*was a joke*

  • Like 1

It doesn't matter. Most of the active club members haven't owned a skyline for years. Some have never owned them.

So

Anyone planning on selling me a boost controller cheap?

Sure.

I have a boost tee that looks like it went down with the titanic before getting brought back up.

That's what you want...... Right....?

:P

I'm very interested to know what is going to happen when people start to buy the local sold Infinitis and that the "Infiniti Skyline" is actually going to be a thing. In the constitution it is considered that anything with a "Skyline" badge is a skyline, so this could cover Prince, Nissan and Infiniti. But at what point does the V-series crowed just become the Infiniti crowd?

Damn you Nissan for complicating things!

correct me if I'm wrong but doesn't it state that you have an interest in skylines not that you own one?

Yeah but at what point are they still skylines? is the upcoming Q100 a skyline? The Q50, Q60 too. Is SAU going to be a place to discuss these models? Organise meets etc?

You need to talk to the admin about those type of things, we don't have control over that. all we know/care about is if you want to come to an event anybody is welcome to do so

I have seen motorbikes turn up to a cruise and they were welcomed because the more the merrier

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...