Jump to content
SAU Community

Recommended Posts

Hey ya,

Since my engine is now built i was thinking of upgrading my drivetrain.

I can pickup a brand new Nismo Conversion kit of the R32 to the 6spd R34 Getrag.

This kit includes

1) Getrag 6spd

2) Transfer case

3) Twin plate nismo super coppermix clutch

4) Front prop shaft

5) Cross member

6) Shift knob.

I can get this for about $8000 USD and the thing I like is it will have 0 km's on them.

What is everyones thoughts? Im thinking eventually I will need a new clutch (not required yet) and my transfer case is 25 years old and my gear box as well. So if I rebuild/strengthen these I am looking at not much more for the getrag.

Also I have heard the 4.111 ratios of the r32 and the 6spd make for abit of fun?????

Link to comment
https://www.sau.com.au/forums/topic/453782-r32-gtr-getrag-conversion/
Share on other sites

  • 1 month later...

or you could try to get a AG-Y tranny, their strenghtening SS690 box is going for 200k yen. Transfer case from AG-Y is another 80k. Add 2k for anothe rbran dnew clutch if you wish. youre at 5000k yen ( which is about 3.5us I believe right?) Your still paying about 3-4k more for this mod. I believe both box would be of same strenght, so you decide if the ratio/6speed is worh that extra money.

  • 1 month later...

no idea, but you dont hear of many breaking. alot of the Japan wangan warriors i.e. 700hp+ 34 GTRs all appear to run the standard box.

locally mercury Motorsport had one in their R34 GTR until going to a OS88 i am fairly certain they changed this out due to wanting to go to sequential not due to a breakage it at 800+hp

i have personally been running one in my 740whp 32 GTR for 3 months now, doing a few track days, racewars and general driving in that time with no issues.

only issues i have found is a total lack of traction in 1st gear so need to do 2nd gear launches to get the best out of it.

Also due to the gears being closer together it is common to miss a gear i.e. go from 2nd to 5th as oppose to 3rd, But i guess that comes down to getting used to the box and being a better driver.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...