Jump to content
SAU Community

Recommended Posts

Hey ya,

Since my engine is now built i was thinking of upgrading my drivetrain.

I can pickup a brand new Nismo Conversion kit of the R32 to the 6spd R34 Getrag.

This kit includes

1) Getrag 6spd

2) Transfer case

3) Twin plate nismo super coppermix clutch

4) Front prop shaft

5) Cross member

6) Shift knob.

I can get this for about $8000 USD and the thing I like is it will have 0 km's on them.

What is everyones thoughts? Im thinking eventually I will need a new clutch (not required yet) and my transfer case is 25 years old and my gear box as well. So if I rebuild/strengthen these I am looking at not much more for the getrag.

Also I have heard the 4.111 ratios of the r32 and the 6spd make for abit of fun?????

Link to comment
https://www.sau.com.au/forums/topic/453782-r32-gtr-getrag-conversion/
Share on other sites

  • 1 month later...

or you could try to get a AG-Y tranny, their strenghtening SS690 box is going for 200k yen. Transfer case from AG-Y is another 80k. Add 2k for anothe rbran dnew clutch if you wish. youre at 5000k yen ( which is about 3.5us I believe right?) Your still paying about 3-4k more for this mod. I believe both box would be of same strenght, so you decide if the ratio/6speed is worh that extra money.

  • 1 month later...

no idea, but you dont hear of many breaking. alot of the Japan wangan warriors i.e. 700hp+ 34 GTRs all appear to run the standard box.

locally mercury Motorsport had one in their R34 GTR until going to a OS88 i am fairly certain they changed this out due to wanting to go to sequential not due to a breakage it at 800+hp

i have personally been running one in my 740whp 32 GTR for 3 months now, doing a few track days, racewars and general driving in that time with no issues.

only issues i have found is a total lack of traction in 1st gear so need to do 2nd gear launches to get the best out of it.

Also due to the gears being closer together it is common to miss a gear i.e. go from 2nd to 5th as oppose to 3rd, But i guess that comes down to getting used to the box and being a better driver.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...