Jump to content
SAU Community

Educated Guess At The Final Tune Results

Nismo 3.2ish
 Share

Recommended Posts

AngryRB Grand Master

AngryRB

Posted
Posted

no matter the details of this, most will look at it how it is, its was at CRD for a bloody long time, they built it so good on them for that but they didnt deliver the final result, and in alot of peoples minds that is what counts!! call it how it is... the JEZ kicked ass with it, you'll have some wobbly knees in the next week when you drop the hammer pete, so jealous right now...

  • Like 1
  • Replies 2.4k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

XKLABA
XKLABA

They lock them so no one can see their tunes, they did the same thing to my FC and Scott was able to get around it I would have expected more down low then that, you need to get someone else to tune

Nismo 3.2ish
Nismo 3.2ish

Here is the only one I have so far, boring

Nismo 3.2ish
Nismo 3.2ish

It car came up great, only trouble is I have to wear sunnies outside the car, great job but mow I have to try and keep it looking the same , pain in the arse , lol Had a quick run when the car wa

Posted Images

JH32 Grand Master

JH32

Posted
Posted

Well done Pete, great result!!!! Am looking forward to some vids :D

When I posted the pic of the 6Boost being installed I had an email from the old builder saying , oh you might notice the Turbo is a different model, I said yes it was noticed and he said that he told me about this when the build was being done, I said I think I would remember that, he said I might have been pissed, good call but that is something I would remember , well , I would think I would remember, hic hic

This does seem pretty weird I reckon. If they had already told you about the turbo, why bother writing you an email to "remind" you. Oh well, it's all done now, enjoy it for what it is :)

XGTRX Veteran

XGTRX

Posted
Posted

no matter the details of this, most will look at it how it is, its was at CRD for a bloody long time, they built it so good on them for that but they didnt deliver the final result, and in alot of peoples minds that is what counts!! call it how it is...

If most look a bit deeper the truth is quite obvious, you didn't have to be Nostradamus to worked it out 30 pages back. Nothing has changed in 15 years of forum garage battles. A shame really.

But what's important is Pete gets his car back and is happy with it.

Stixbnr32 Rising Star

Stixbnr32

Posted
Posted

I remember reading an article and an english guy built a RIPS RB30 in a R33 with a PPG Getrag 6Speed they detuned it to 700HP as the torque smashed the gearbox to peices after a launch down the strip.

Was on pump gas too.

So have fun hahahaha with that monster and that insane torque number. Think there are reasons AMG also electronically limit their torque numbers :P

Nismo 3.2ish Grand Master

Nismo 3.2ish

Posted
  • Author
Posted

Well done Pete, great result!!!! Am looking forward to some vids :D

This does seem pretty weird I reckon. If they had already told you about the turbo, why bother writing you an email to "remind" you. Oh well, it's all done now, enjoy it for what it is :)

You are right, they just bought the Turbo thing up AFTER I posted pics of the cracks in the manifold and 6boost, I was surprised to get an email from them,

Matters not, I have not stopped smiling since I got the Dynos and could see the car is running much better, even at my piss stops through the night I had a smile :yes:

Vids, what sort of vids can I do, Dyno tunes are boring , see if I can get some tyre action if my drive line and AD08Rs let me without leaving the box behind :bomb_ie:

Nismo 3.2ish Grand Master

Nismo 3.2ish

Posted
  • Author
Posted

I remember reading an article and an english guy built a RIPS RB30 in a R33 with a PPG Getrag 6Speed they detuned it to 700HP as the torque smashed the gearbox to peices after a launch down the strip.

Was on pump gas too.

So have fun hahahaha with that monster and that insane torque number. Think there are reasons AMG also electronically limit their torque numbers :P

Well , thanks, I think lol

I will see how it feels and go from there, it will be interesting to see how it feels to drive instead of looking at a Dyno graph, about 700rpm earlier full boost,so see if it gets it going.

The tractive effort/torque is 974Nm , peaking at 5250rpm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...