Jump to content
SAU Community

Recommended Posts

Now enter SAU nsw trackday next Monday

That sounds great and as soon as I am sorted and everything is OK with the car I am going to start doing some of these days, Duncan suggested them.

I have to sort the steering out, it still pulls around more than it should , I thought it was just tram lining ? I am seeing my mechanic tomorrow and find the best bloke in the area to do the steering and then an alignment to see if it can be sorted. It can be spooky when the car wants to go where by itself.

There seems a little torque steer as well but it could be exaggerated by the steering problem. I thought there was something not right with it and Jez mentioned it and said there seems to be a problem and to have it checked out. Nothing serious but the steering is something I want right.

It was good to have a second opinion.

I'm glad you were able to have success with Jez pete. Is he not the friendliest tuner you have ever met? And his customer support is second to none.

Are you looking at getting the steering sorted back in foster? I can recommend Road2Race on the central Coast, they will sort you out no worries :)

Definitely should get mods to move to build section. You can keep us up to date with the OS88 install in there!

What is with you blokes, close it down, move it to another section , get over it ??

You whinged and put crap on me because I wanted response , it is my car and I will do what I want with it and if you blokes do not like it , PO.

Well I got it going pretty good and the result speak for itself and there is more RESPONSE left should I choose to go that way, you might not like it , but who cares what you think!

It is an RB30 conversion that is being tweaked , it is an RB30 thread, if you do not like it , go away, don't read it , or get it closed down BUT stop your whinging , close it down I do not give a rats !

There are blokes that have enjoyed some of it and seen the crap I have gone through over the past 12 months, they have also seen that I did not give up when the haters had their laughs and digs at my inexperience but they did not know my resolve and to them, thanks

What is with you blokes, close it down, move it to another section , get over it ??

You whinged and put crap on me because I wanted response , it is my car and I will do what I want with it and if you blokes do not like it , PO.

Well I got it going pretty good and the result speak for itself and there is more RESPONSE left should I choose to go that way, you might not like it , but who cares what you think!

It is an RB30 conversion that is being tweaked , it is an RB30 thread, if you do not like it , go away, don't read it , or get it closed down BUT stop your whinging , close it down I do not give a rats !

There are blokes that have enjoyed some of it and seen the crap I have gone through over the past 12 months, they have also seen that I did not give up when the haters had their laughs and digs at my inexperience but they did not know my resolve and to them, thanks

The idea behind putting it in the Projects section Pete is that more members will get visibility to it, I'm sure fewer members look in the RB30 section than they do the Projects section.

It's been a great read and I'm sure many others would enjoy having a read of the thread, and then hopefully eagerly awaiting future updates!! :)

PS. The surge tank enclosure looks great :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...