Jump to content
SAU Community

Recommended Posts

Surge tank arrived a couple of days ago and after some assembly and a lot of speed flow fittings it currently looks like thisA6BF4BA7-D7CD-45F2-97F3-ADF539903236.thumb.jpeg.086daddf8d2e69fc1a5a9b8aad9b6d73.jpegnow just waiting for the fuel pumps to arrive and I’ll fit and wire them inside then fit the tank into the car 

  • Like 2
20 minutes ago, BakemonoRicer said:

I also like how everyone is getting big fuel system after everyone told me they’re not needed haha 

Yeap, my fuel system needed the Ford green top 42lb- 440cc injectors to get it up near 360-400kw

The stock 28lb - 300cc only got me 260kw at around 90%

Dommegabudget

 

1 hour ago, BakemonoRicer said:

I also like how everyone is getting big fuel system after everyone told me they’re not needed haha 

It’s a 4L which is plenty and the pumps are the same size as previously, the only reason I’ve gone this way is I wanted the original gauge sender back in the car 

How do those fuel hats work with the factory fuel inspection cover, I assume it doesn't fit and you need to run surge tank/pumps in the boot, and then somehow seal the boot to cabin for vapour? 

The system in my car is not megadonwhatever spec, I just run -6 lines from the standard hat with a lift pump in the standard cradle, to an external surge tank with external pump under the rear seat floor which means all fuel stays out of the cabin.

It will be mounted in the boot and because I’m using the ptfe (Teflon) hoses and the tank is hard anodized it doesn’t smell 

I already have -8 hoses running from the front to where the frenchies hat in the factory tank was. now I’ve fitted the factory hat back in with -8 bulk heads and I’ll run lines from the hat to the surge tank and then hoses from the surge tank into the -8 lines already in the car 

  • Like 1
14 hours ago, BakemonoRicer said:

I also like how everyone is getting big fuel system after everyone told me they’re not needed haha 

You have 15k worth of fuel systems in 2 300kw cars. 🧐

They definitely weren't needed in your situation. 1x $280 525 Walbro in each car woulda been fine. Even NASA woulda approved! 

  • Haha 6
On 20/02/2021 at 11:57 AM, r32-25t said:

Surge tank arrived a couple of days ago and after some assembly and a lot of speed flow fittings it currently looks like thisA6BF4BA7-D7CD-45F2-97F3-ADF539903236.thumb.jpeg.086daddf8d2e69fc1a5a9b8aad9b6d73.jpegnow just waiting for the fuel pumps to arrive and I’ll fit and wire them inside then fit the tank into the car 

should use a few 60s or 45s so they're not all bunched up :)

(feel free to ignore, and also ignore those fly back diodes, will be hidden in the wiring one day)

20191013_181637.thumb.jpg.49f2684cdc3dfda20bc92b761ef29d63.jpg

  • Like 1

Yeah I wasn't sure of the data underlying the recommendation, I run the factory hat with no issues with a little over 300kw and an external tank.

And thanks Brett, I was confused and thought your pic was a hat for the standard tank, I can see it is the top of a surge tank which makes much more sense.

18 minutes ago, Dose Pipe Sutututu said:

should use a few 60s or 45s so they're not all bunched up :)

(feel free to ignore, and also ignore those fly back diodes, will be hidden in the wiring one day)

20191013_181637.thumb.jpg.49f2684cdc3dfda20bc92b761ef29d63.jpg

That works for 33/34 owners at the hat in the fuel tank sits higher then the surge tank, r32 the hat sits lower then the surge and the lines come off the surge tank and then go straight down 

56 minutes ago, r32-25t said:

That works for 33/34 owners at the hat in the fuel tank sits higher then the surge tank, r32 the hat sits lower then the surge and the lines come off the surge tank and then go straight down 

Oh derp!

You are correct, R32 is setup similar to S13s, forgot that.. so yeah feel free to ignore lol

  • Haha 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...