Jump to content
SAU Community

Recommended Posts

Because everyone is too f**king scared to say what they're actually thinking when it comes to shit like this. No one wants to step up and say what everyone is thinking (except Sam Newman on the Goodes issue)

But another example is the Harly Bennel drugs story....

He has to come out and say he has a drug problem, that his life is out of control etc, he did a few lines of coke with some strippers.. If it wasn't for the pictures of it happening, he would've kept playing footy week in week out, but instead he has to put on a sad face for the cameras..

I know first hand that a current captain of an AFL club doesn't mind the coke, but because there's no photos of it out there he can just get on with playing football. One photo, and all of a sudden he has a drug problem and needs Jesus

  • Like 1

I can't understand why the media perpetuate the 'racism' theory

Because playing into it means they get interviews with the flog and can continue the storm in a tea cup and have something to write about. Fkn playground issue. Goodes needs to see that he took it too far and played a game he can't win. You never take on the crowd as a sports star, and to play the racism card is begging for reaction.

  • Like 1

Hey Hamish.... Remember your old car?

Turns out you weren't using it right... Need to put it into Snow Mode and just thrash it harder than Bird's mum

https://www.youtube.com/watch?v=hbo_GaP4KWo

lel

Hey Hamish.... Remember your old car?

Turns out you weren't using it right... Need to put it into Snow Mode and just thrash it harder than Bird's mum

https://www.youtube.com/watch?v=hbo_GaP4KWo

Then get spanked by Birds and his D1Rs

1-1

Until next time...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...