Jump to content
SAU Community

Recommended Posts

so noticed the box where the cable goes from the street to the shop was buzzing.
had a sparky come look at it and turns out the storms had been causing it to move and short out, meaning we need a new box.
no worries, call oznet to come and cut it from the pole.
"well be there at 4:30"


still waiting

How much would you say is normal price for a diff centre swap? Includes fresh oil

(even though the oil I have in there is like 5,000kms old)

Including the cost of the new centre?

Or just the labour costs involved?

Found some mini PCs that dick smith were throwing out (Zotacs) managed to get 3 of them out of their bin, came with intel SSDs too.. linux for their promotion screens.. will format and put windows on.. should be able to sell at least $200 each pretty easy. #winning

Anyone want a HTPC? :P

#makingmy88e$back

Edited by UNR33L
  • Like 1

Pics and info?

I'll let ya know when I'm back from Vietnam from memory they have 4 or 8gb ram, 80gb ssd, dual core atom or celeron, hdmi, usb3, sata 3, network jack, optical sound output and all that good stuff.

Zotac ID18

zotac_zbox_id18_mit_xbmc_2.jpg

Edited by UNR33L
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...