Jump to content
SAU Community

Recommended Posts

Going 29 would push the pistons over 86.5mm no?, wouldn't this reduce the reliability (thickness of walls)?

I also had a read of nitto's website, they do something interesting with the rod design to make the entire system more reliable, but cant tell if this is true.

86.5 is fine, can even go 87

My 2.9 doesn't actually make it 2.9.. It's still 2.8xx

In saying that even the jap 2.8s are not truly 2.8 .. They're stil 2.7xx

Which one would you choose, there are three?

Step 0 has the most response but lowest rev limit, not sure about 2 or 3.

How can different rotating assembly with the same capacity offer more or less "response"? The turbo(s) only know say 2770 cc worth of air pushing them, not that it has an I beam or H beam rod.

How can different rotating assembly with the same capacity offer more or less "response"? The turbo(s) only know say 2770 cc worth of air pushing them, not that it has an I beam or H beam rod.

Think he's talking about weight

Yes sorry, I think Joey is right.

I was going off what was on their website so didn't clarify.

I see that this post is being ignored by everyone, as it should.

Not everyone :whistling: , some of us are desperate , so maybe if he/she did not want to kiss and definately no tounge, it could be a goer :yes::no::yes::wub:

Do you realize that Cutty has not been on HIS own thread since page 12 , post 221 and only 3 times since page 7.You blokes may have forgotten that he would love to go from 1000 to 9000rpm ASAP ( Yummy me too) and not from 5000 or 6000rpm to 9000rpm, maybe he is my long lost Son :woot:

Cutty has probably killed himself after reading our dumb arse posts, "I like them" as it gets boring if you know shit all about motors, technical shit, etc, Pics are good, so I am going to tell him something if he is still alive and kicking, some home truths as "I" believe them to be.. I find it hard to believe you can get a 26 to be as good as a 28 to a 32 as a DD if you want go from idle.

As a DD/ street car Cutty, you will be happier with a stroker in your Skyline, you say you want response ASAP as a DD , then, the bigger stroker the better to get these heavy low CCs cars going :yes:

To me with the extra CCs they are more linear and I believe safer on the road than a peaky R that kicks in hard. As you apply the thottle you can feel the car react more smoothly on corners and at least 1 or 2 gears higher. I do have an excellent drive line to help put the power down, no spinning wheels, just goes :yes:

I have no problem with other blokes preferences to how they want their cars to go , hope it works for them, but response is sort of like a swear word with "some" blokes on SAU, the only words I can think of to use instead of response is , Zoom , jump, leap, and fast! but 5 letters, quick, swift, rapid, brisk, hasty, nippy,smart, fleet, zzzzzzzzzzz whoops dozed off, time to top up :yes:

The only mod difference with the Dynos were , the cams went from 260 9.15 Poncam B to 260 10.8 ,, 6boost , 4" dump( same 3.5" exhaust) and of course the 3.2 stroker. When the 26 was first tuned with the new mods there were NO problems with the 3" dump.

But the 3.2 @ 437kw is 92 kw more @22psi than the 26s 345kw @24psi , that is a lot on 98 pump .

By the way , my daughters sleeping over tonight, so the old bloke has been out to play, hic hic :special:

post-52098-0-31721300-1441341865_thumb.jpg

post-52098-0-49164100-1441341886_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...