Jump to content
SAU Community

Recommended Posts

Ok, so the turbos glowed and the boost dropped off...

Turbos glowing - excessive egt.... why?

Boost falls off - Compressor cant keep up (out of flow). Not related to exhaust housing restriction. If anything boost would remain at targeted level because the gases cant escape the engine quickly enough.

let's play a game of broscience.. if your housings are too small and you can't get enough exhaust gases out of the motor to spin up the turbines how will the compressor keep working?

Say you can only get X amount of exhaust gas into the tiny housings and only X amount of exhaust can get out.. well that's only Y amount of kinetic energy to move the compressor.

Like I said, not rocket science.

we do know they work well up to 550 600 whp thats all that matters.

Amazingly the front wheel and the rear wheel run out of steam at the same Point which makes it a nicely balanced turbo but it has limits.

Like anything

Edited by mr skidz

Lets just pour some fuel on this one lol

The tail end isn't restricted in -5s, the compressor is out of flow, my RSs with the same rear hold 28psi flat to 8500 on a 3.0 though the power does start to fall away but that might have been the old cams as well

And the boost v backpressure on these things is garbage

Lets just pour some fuel on this one lol

The tail end isn't restricted in -5s, the compressor is out of flow, my RSs with the same rear hold 28psi flat to 8500 on a 3.0 though the power does start to fall away but that might have been the old cams as well

And the boost v backpressure on these things is garbage

What do you mean the tail end isn't restrictive?

You mean exhaust housing?

And what do you mean boost vs back pressure is garbage back pressure where in your turbine or in your exhaust?

Have you measured it?

We all really need to be more specific including myself with our typing as everything will be taken out of context and waste probably 10 pages of this thread and half our lives trying to clear things up[emoji85]

Edited by mr skidz

What do you mean the tail end isn't restrictive?

You mean exhaust housing?

And what do you mean boost vs back pressure is garbage back pressure where in your turbine or in your exhaust?

Have you measured it?

We all really need to be more specific including myself with our typing as everything will be taken out of context and waste probably 10 pages of this thread and half our lives trying to clear things up[emoji85]

I mean the exhaust side of a -5 can out flow what ever the compressor side can send it

I mean exhaust housing and turbine wheel, the more variation in pressure from pre and post turbine the better the turbo can work, just to spell it out the lower the pressure in the exhaust post turbine compaired to the pressure in the manifold/exhaust housing the better the turbo will work

Boost v backpressure in this instance is obvious but I will spell it out also for the knowledge lacking few, the backpressure pre turbine v how much boost the compressor is making

We measured it in the BSM GTR time attack/ sports sedan when it was running -10s and ended up controlling boost according to exhaust manifold pressure

if everyone had to explain everything that is posted this thread would be a fark load longer, certain things just need to be expected to be common knowledge, if there is something someone doesn't know they should ask a specific question

Did you find boost pressure and manifold pressure to equalize at 28psi?

Were they N1 or std ported ones?

My manifold is threaded and I'll be measuring the difference at some stage.

Edited by mr skidz

Did you find boost pressure and manifold pressure to equalize at 28psi?

Were they N1 or std ported ones?

My manifold is threaded and I'll be measuring the difference at some stage.

We didn't test mine, I don't have that capability setup on mine but we set the BSM GTR to about 1.8-2:1 back pressure to boost iirc, that was a long time ago now

BSM had Tomei manifolds mine a ported std

At a certain boost level the manifold pressure escalated which is why the boost was set that way

We didn't test mine, I don't have that capability setup on mine but we set the BSM GTR to about 1.8-2:1 back pressure to boost iirc, that was a long time ago now

BSM had Tomei manifolds mine a ported std

At a certain boost level the manifold pressure escalated which is why the boost was set that way

Wow that is average for a race car... but was that built to class rules?

Shop building the engine placed an order for the stroker at the begging of match but the pistons still haven't arrived yet apparently. So I dunno, august at this rate between me putting it back in when its done and my site roster.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...