Jump to content
SAU Community

Recommended Posts

29 minutes ago, Racer5 said:

Did you get the email about random breath testing during the weekend.

Exclusion and cams disipline if over 0.01.

 

fatz would probably need to drink a carton before he reached the limit anyway :P

well it looks like snowy should be happy with the sprint, he got 2.25.4 well done!  I saw a few other familiar names in there but most of them aren't on SAU I think.

 

Fastest lap was still well over 2min (2,.04.2 in the m6) so that target is still standing for now....

umm yeah I suspect it might be showing up a lack of power there....must be frustrating to watch 86s drive past.

it is an awesome track though, great to see such an accessible way to get a run there

7 hours ago, Duncan said:

well it looks like snowy should be happy with the sprint, he got 2.25.4 well done! 

Damn oath. I even got a big ass trophy that says Class A Bathurst Champion which is right up there in the cool stakes.

Such a cool event - was so much less stress that a proper race weekend there. At least once every session I just backed off and did an 80% lap and just soaked up being there and driving that bit of tarmac. 

  • Like 1

What an epic track, I was mega slow and just started to get some confidence then bang axle snaps.

The humps on both straights are interesting at speed (I was backing off coming up to them) my car is fast in a straight line but I am not. 

 

Back next year for sure15259658_10155591310822516_5410812396923313575_o.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...