Jump to content
SAU Community

Recommended Posts

Hey all

I have a 32gtst and i was planning on putting a rb25 in it.

At the moment it has the 20 and is around 170kws and i just feel its lifeless and gutless. The plan was to chuck in a rb25 but then i have toi take it through regency and get it checked, plus upgrade a few things to get it through. is it worth it?

If both engines chucked out say 250kws, will you notice much difference between engines? Its all im looking at for a daily weather it be the 20 or 25. 

Just dont know if its worth the hassel as im building a 25/30 at the moment for the track car and i just cant be stuffed!!

Link to comment
https://www.sau.com.au/forums/topic/465900-opinions-rb20-or-25/
Share on other sites

The difference between my cefiro (230-240rwkw RB20) and my daily (Stock RB25DET R33 sedan) is huge, on the street.

Cefiro needs revs, and lots of them. It is laggy.

R33 feels like its on boost instantly, comparably, obviously with less up top, which, as GTSboy said, is where it counts for a street car.

Then I drive the missus TT 300ZX and wonder what the F*%k I'm doing with an RB20

Haha.

All depends what you like. I don't really mind the lag, can still putt around off boost, and is fine for the track (drifting). Would piss me off if I had to drive it in traffic everyday though.

 

 

 

 

  • Like 1
RB25DET NEO, put in ARP2000 studs, slap on a GTX3576 on a TS manifold with divided 0.83 rear housing + all supporting BS.. make 400kW+


Destroy the oil pump from one of there many issues to you throw a rod threw the block and destroy everything.

Too much timing bent a rod? Haha

I always relax on the timing peak torque to keep these stock RBs together. Been doing 370kW on mine for some time, prior to that a good 330kW. 

Head gasket is going though, must have screwed it prior through ARP studs. Do about 4 to 5 hard laps and you'll lose coolant.

My old 32 was my daily for 6 years, running 200 odd for most of that time

If you can get a 2530 or similar turbo (I had a 2510) and set it up to run 18-20psi it's not overly laggy and provides good top end

During the same time I had 2 mates with 33's making similar peak power and the extra cc's plus the vct made them a much quicker car everywhere

If I was my car, being a daily I'd go rb25. Even with a stock turbo setup making 200kw it would be a quick daily

  • Like 2

RB30E is where it's at for daily driving :P

In saying that, my stocker RB20 R32 with R34 turbo was a good daily drive, albeit slow, unless I revved it out.
Was averaging 9L/100km because in traffic, no boost until 3,000rpm + slow moving = long boring drives to work and home.

In saying that, NEO6 turbo is a much better drive and decently efficient as well (a relo of mine put one in his R31). RB30 with NEO head even more so haha.

Since your other cars have higher powered engines, put a V8 in your R32.

  • Like 1

More the oil pump has the same crank nose issue on the neo as early 25s and end up with no oil pressure and a dead motor. No tune is going to help that, conservative driving will yet no fun in that. Pointless doing up what's a potential hand grenade without fixing oil control issues first.

Yuh, but Jonny dose-a-holic is a subscriber of the blow-it-up-and-slip-another-stock-engine-in school of thought.  Play engine roulette.  Sometimes you win for ever.  Sometimes you lose in a week.  If you lose, you spend another grand and have another spin.

The alternative is to open the engine, let all the Nissan out and spend $5k putting expensive parts inside.  Different sort of roulette.

  • Like 1
Yuh, but Jonny dose-a-holic is a subscriber of the blow-it-up-and-slip-another-stock-engine-in school of thought.  Play engine roulette.  Sometimes you win for ever.  Sometimes you lose in a week.  If you lose, you spend another grand and have another spin.

The alternative is to open the engine, let all the Nissan out and spend $5k putting expensive parts inside.  Different sort of roulette.


I'm also in the, if it ain't broke don't fix it school of thought. Why spend big $ on something that "may" happen. RB25's aren't exactly rare and there's no premium a week before race wars either:). Plenty of guys out there pushing decent power and tracking stock RB25's without issue. Obviously drift guys sitting on the limiter constantly are more likely to have problems.

Back on topic the OP asked about. A 25 will be better in every way as a daily and 250rwkw will be childs play for it. The low end torque and response being the major difference. Keep the Nissan in and keep smiling[emoji106]
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...