Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
On 20/12/2016 at 2:24 PM, Kinkstaah said:

I stupidly suggested to my gf that a MX5 would be a perfect car for her to get a head start in, learn on, use, etc. 

Now I want one, with a small turbo albeit.

LS Swapped FD would be great, but if you want a ~1250-1350kg car with an easy to use 250-270kw then you start looking into options like, oh I dunno, a RX7.. or a jap turbo import made by Nissan...

I have this discussion with my housemate who got an E36 328i with plans to put a LS1 in.

I got bored the other day so did some quick power-to-weight calculations:

Given that the 4door is about 1430kg dry with a manual box (according to 'sources' aka the internets) my current power-to-weight is roughly 192rwkw per tonne.

To get to the same in an MX5 you'd need:

  • NA series – 180rwkw
  • NB – 204rwkw
  • NC – 213rwkw

So naturally aspirated is pretty much out the window. Given the size of the donk you'll probably need forgies too = $$.

For comparison, in an S13 you'd need 235rwkw, which should be reasonably easy with a sorted SR20DET?

So perhaps OP already has the perfect track car? :)

Obviously power-to-weight is just part of the equation, but still...

Actually the MX5 engines (at least the 1.8) is known to hold a good 200rwkw, there's plenty of people out there with a turbo, some guy has gone full John Richardson at 191 rwkw and has done something like 60 track days on it. Seems about 180rwkw in a MX5 is similar to the "300 is safe" kw in a RB25.

And then you go to a corner or brake and instantly lose 400KG of weight.

But no, the S13 with a modest power setup and sorted handling is a very good option as well. You only really get problems in any car if you decide HOLY SHIT POWAAAAAAR or decide you want slicks and then you get oil control fun. I mean shit the S13 gets blame for being a bad chassis, but someone won WTAC with one. Not a very stock one albeit, but it can't be that bad for fun and games!

  • Like 1

I think the mx5 guy your talking about with 191rwkw also had an Na one with 90 something rwkw and was still very very competitive. Turbo did 1.22 -23 around sandown and the Na did 1.25-26 from memory. The performance came from weight reduction. Anything that could be removed was and everything else lightened. Think fibre glass panels, carbon roof, carbon drivers seat etc. Very impressive what those little things can do but just like anything $ need to be spent. Skylines and Silvias are still great track cars and can be made very quick without mega $ spending. Think, richos r33. That is 1 quick machine that cost a modest amount focusing on the things that needed to be done. He could make that thing substantially quicker with bulk $ put into it.

  • Like 1
22 hours ago, Kinkstaah said:

Actually the MX5 engines (at least the 1.8) is known to hold a good 200rwkw, there's plenty of people out there with a turbo, some guy has gone full John Richardson at 191 rwkw and has done something like 60 track days on it. Seems about 180rwkw in a MX5 is similar to the "300 is safe" kw in a RB25.

And then you go to a corner or brake and instantly lose 400KG of weight.
...

Fair enough :)

21 hours ago, admS15 said:

I think the mx5 guy your talking about with 191rwkw also had an Na one with 90 something rwkw and was still very very competitive. Turbo did 1.22 -23 around sandown and the Na did 1.25-26 from memory. The performance came from weight reduction. Anything that could be removed was and everything else lightened. Think fibre glass panels, carbon roof, carbon drivers seat etc. Very impressive what those little things can do but just like anything $ need to be spent. Skylines and Silvias are still great track cars and can be made very quick without mega $ spending. Think, richos r33. That is 1 quick machine that cost a modest amount focusing on the things that needed to be done. He could make that thing substantially quicker with bulk $ put into it.

Very good points Bill. Those N/A times are insane, must be a great driver and a very well sorted car. It must be so much easier on all parts carrying that much less weight around, which should help with reliability.

So I think my ideal track car then is a fully sorted 200rwkw turbo MX5 NA pre-1992 in club plates so you can drive to/from events. For $10k please :) 

Very good points Bill. Those N/A times are insane, must be a great driver and a very well sorted car. It must be so much easier on all parts carrying that much less weight around, which should help with reliability.
So I think my ideal track car then is a fully sorted 200rwkw turbo MX5 NA pre-1992 in club plates so you can drive to/from events. For $10k please [emoji4] 

10k order 1 for me too please[emoji106]
  • Like 1

Thoughts on this MX5?

http://www.my105.com/ListingDetails/p/1/k/mx5/id/17404

 

I like the idea of swapping for something a little easier to manage and cheaper to run. LS1 with an RX7 also sounds interesting. Does it drop straight in?

Is Sports Sedans the only place you can run something with an engine swap?

In a CAMS sense, improved production allows an engine swap for same manufacturer/same number of cylinders. but yes you'd need sports sedans for a nissan 4 cylinder in an mx5.

Thoughts on this MX5?
http://www.my105.com/ListingDetails/p/1/k/mx5/id/17404
 
I like the idea of swapping for something a little easier to manage and cheaper to run. LS1 with an RX7 also sounds interesting. Does it drop straight in?
Is Sports Sedans the only place you can run something with an engine swap?

I reckon it's awesome but would be pretty tough to engineer for rego I'm guessing
  • 2 weeks later...

I reckon it's awesome but would be pretty tough to engineer for rego I'm guessing


LOL I was actually looking at it for myself apologies! No need for engineering as it would be a track car only.

I've been giving this some serious thought as the GTR is in a pretty good state to sell as literally everything has been refreshed on it, and the 32 market is on the up.

I was actually fairly close to securing a trade on an SR3 but it fell through. But I did do quite a bit of research on them and liked what I found. Much as Ben noted with the Radical, all parts are 'lifed' and replacing anything costs a fortune. So can't break anything which rules out door to door racing, however running it as a track car is definitely affordable. Also you can source a used hayabusa engine and chuck that in for a fraction of the cost of a sealed engine.

The other cars that interest me are ICV's. Only thing that concerns me is safety. Rollover protection looks suss and hitting a wall at 200kmh in a metal coffin welded together by a bloke in a shed doesn't exactly inspire confidence. Does anyone know more about them?

Also, mx5's are rad. My first car was an NC it is still one of the best cars I've ever driven. Needs a snail though
  • Like 1

Oh wow someone's combined a (turbo) MX-5 and an open wheeler: http://jalopnik.com/driving-a-stripped-down-turbo-miata-kit-car-doors-are-1791238438

You basically move your NA/NB running gear over to a tube chassis and lose about 1/3 weight in the process. Looks like heaps fun.

The Exocet kits start at $7k US, which is actually pretty good. No idea whether something like this could be engineered in Aus. Great idea nonetheless!

sgfr6hvvob7gytxnk2ns.jpg

 

4 hours ago, V28VX37 said:

 

Oh wow someone's combined a (turbo) MX-5 and an open wheeler

 

There is a link on page 1 of this thread to an Exocet....

Edited by GeeDog
  • Like 1

My knee jerk intrawebs review of the Exocet is it's rubbish but perhaps it reminds me of dickheads in Clubmans who apparently think it's cool to try to take your apex, next time I'm turning in track rat.

Serious? Would need mudguards wouldn't it? That could be a problem, nothing to hang them off.

  • Like 1

FYI looks like the Exocet distributor in Aus has gone under and ripped a few people off by the sounds of it. 

Would make for an interesting track car, wonder if it could run against the clubbies in supersprints 

  • 2 weeks later...

We've run a Stohr WF1 for a few years-- by far the fastest car per dollar you can drive.  54's - 56's at Wakefield, 1:25's to 1:27's at EC.  Some of the numbers earlier in thread ($3k per day?) are seriously off the money.  The car has a GSXR1000 engine which you can buy for about $3k complete.  Race prep is relatively cheap, the thing is somewhat simple really, most of the tech is in the aero.

  • Like 3
13 hours ago, LSX-438 said:

Some of the numbers earlier in thread ($3k per day?) are seriously off the money.

Sports Racer Series (per event)

$1,900 = New Tyres

$500 = Mechanic / Pit crew

$100 = fuel

$1,895 = Event entry fee

Total = $4,395

 

Radical Australia Cup (per event)

$1,900 = New Tyres

$500 = Mechanic / Pit crew

$100 = fuel

$3,975 = Event entry fee

Total = $6,475

 

Now of course, if you just want to do club trackdays or super sprints that total per event comes down to around $500

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...